Super 3.02_20160825 ROM - SPFT version

MarcinP

bencebacsi replied at 2016-9-26 02:06
Sorry, but nobody has ever reported an issue of downloading the OTA update file about a UMi phone. ...

Hi bencebacsi
I'm not saying that there is issue with OTA updates in umi just a lot people and me are confused with some details because some information are different each other. In some posts in other topics are some information and a lot questions about updates through SPFT ( what needs to be unchecked etc) and some people say that after SPFT update screen stopped working correctly ( ghost touches etc. ). That why I mentioned to use zip. Folder for updating umi phones to skip SPFT as after download zip folder in to phone you don't have any extra options just settings>aabut phone >local update >chose zip and done.
Thanks for your answer
Regards

MarcinP

Hi everyone.

Hi
1. After last update I found that when phone is on flat surface (table, seat, chair, etc) screen won't respond or hard to respond, you need put phone in to hand or on legs. Is there any body sensor on back of phone to picked up where phone is put?
2. The light sensor is working fine but I found that in the gray,  dark and at night is showing same value 0,0 lux and won't adjust screen brightness. Is that possible to fix in next update? I compare to other phones and in others showing different values as at gray light (evening) around 50-200 lux. Or if you using phone at night is 0.0 lux and then you switch on any light still is showing 0.0 lux and won't adjust brightness.
3. Is possible to remove one short cut for Sim card data switch on and replace with Hotspot as on short cut list is two Sim card data switches but there is no hotspot
4. I found that when phone is in deep sleep mode sometimes power button won't wake up phone or is taking long time to wake up phone
5. I found that CPU-Z app is showing wrong cpu data and most times will freeze up phone and then phone will reboot it self. As in information book says that there is 4 * 1,2 GHz and 4 * 2,0 GHz cpu-s but cpu-z could show that five or six has 1950 GHz.
6.Camera is fine (is definitely improved) I dont have any issues but one could be changes as when battery is under 15% flash wont work and flash light is working ,for me this is strange. Could you change that the flash is working never mined what charge level is battery
Bencebacsi could you tell me is possible fix all this issues with this update or maybe next ota update will include this fixes or ever those issues will be fixed?
I just wondering is spft update safe? As in last update posts one post is about screen calibration problem after update (and he checked others softwares and other spft and since update touch is uncalibrated)
Many thanks for answer
Hi bencebacsi  could you answer to this questions?

bencebacsi

MarcinP replied at 2016-9-26 14:59
Hi bencebacsi
I'm not saying that there is issue with OTA updates in umi just a lot people and me ...

Hi,

This is a special case now. Both UMi Super and MAX has been started to be manufactured with a new kind of touch panel, that needs a new driver to be installed in the system. So, users of these newer devices cannot use the older ROMs. Normally you don't have to uncheck partitions in the SP flash Tool.
Now I'm uploading the update for UMi MAX with the new TP driver and a such update will also come for the Super. The updated ROMs contains the TP drivers of both the older and newer devices, so everybody can install them and enjoy their benefits.

bencebacsi

MarcinP replied at 2016-9-27 00:37
Hi everyone.

Hi

1. Please wait for the next update (just a few days) with new touch screen drivers.
2. Hardware analysing apps are not always compatible with each kind of hardware (mostly not) and can report false data. If the screen brightness is being adjusted correctly in all light conditions, then your light sensor works properly.
3. Sorry, but I don't understand your question. Please try to reformulate it.
4. What does 'deep sleep' means at you?
5. That's a compatibility issue of the specific app again. I suggest you to install CPU X. That also shows wrong values but can measure the right ones.
6. The battery saver mode automatically turns on when the battery percentage is under 15% and it turns off the flash LED. Sorry, but that won't be changed. It's quite a standard feature of todays smartphones.
We already discussed that, the touch screen issue was caused by the missing correct driver in earlier ROM versions. The next one will solve it. Anyway, using the SPFT is quite safe - you never can permanently brick your phone with it.

TUPLI

Helo !
Is this update available just for: this file and SP Flash Tool (together), and the new update be a new date, or be new update this update date 25082016. Because my umi super dont receive this update 25082016 with wireles. Thank you.

bencebacsi

TUPLI replied at 2016-9-27 02:36
Helo !
Is this update available just for: this file and SP Flash Tool (together), and the new update ...

Hi,

This update has not been and won't be released via FOTA and you may just skip it. The next FOTA update is going to be released on this Wednessday as expected.

TUPLI

Super great, thank you. Have a good day. Bye

MarcinP

bencebacsi replied at 2016-9-27 02:21
1. Please wait for the next update (just a few days) with new touch screen drivers.
2. Hardware an ...

Hi bencebacsi
Firstly I wish to say big thank you for your answer.
To explain some my questions as:
2. I have small problem with auto screen brightness adjustment. When is small bit darker as at the evening screen is completely dark and won't adjust. Light sensor Is just not to sensitive at darker time. Example: when you switch on phone when is completely dark at night there is minimum brightness of screen (which is fine) but if you switch on light in room or TV etc. screen brightness stay on on same level and is hard to see anything. That why I used cpu-z to check light sensor and when screen changing brightness data in cpu-z is changing too. But as I said is not changing in darker conditions.
3. When you slide from top to down on screen you get short cuts list and on that list is two very similar short cuts one is on the centre of list and is showing network bars  picture when you click this you can switch on sim data and another is on bottom right and is showing picture of sim cards and when you press this one you switch on sim data which is doing exactly the same  I wish replace bottom right to other short cut as is no need keep two exactly the same short cuts on the list and I wish put in there short cut for hotspot (tethering)
4. Deep sleep mode. When phone is not in use for longer time after few hours or after night then few times happened for me that when I pressed power button nothing happened and after few seconds screen switched on it self, firstly I thought that phone is completely off because took long time to wake up.
I hope that those explanation help to you understand my issues.

TUPLI

23092016 update available, just on wifi

nik313

TUPLI replied at 2016-9-28 00:09
23092016 update available, just on wifi

I try to update but return error in the recovery mode.