Super 3.02_20160825 ROM - SPFT version

single

bencebacsi replied at 2016-9-23 21:09
Sorry, but you probably have a hardware issue, that won't be resolved by a software update.

You mean that if ghost touches happen only when the phone temperature rises it indicates hardware problem,  and if it happens randomly it should be solved by the new driver?

TUPLI

bencebacsi replied at 2016-9-24 03:53
An OTA update will be available in a few days.

Thank you. Good day.

stiaconi

\n\n
Hi, do u know if it contains fix Gps? thanks

DENYS2222

Brand new Umi super touchscreen does not work .Video https://www.youtube.com/watch?v=hbK5dyXEYKA

Is it hardware problem or a software? is the new driver help my problem? Thanks.

bencebacsi

single replied at 2016-9-24 11:13
You mean that if ghost touches happen only when the phone temperature rises it indicates hardware  ...

Hi,

Yes, but if it's a hardware issue, that won't be solved by a new driver. The hardware needs to be repaired or replaced.

bencebacsi

stiaconi replied at 2016-9-24 16:33
Edited by stiaconi at 2016-9-24 16:49 \n\n
Hi, do u know if it contains fix Gps? thanks

There has never been GPS issues on the software side, I told that many times. Even if you don't believe it, I can't say anything else.

bencebacsi

DENYS2222 replied at 2016-9-24 21:36
Brand new Umi super touchscreen does not work .Video https://www.youtube.com/watch?v=hbK5dyXEYKA

Is ...

If you got the new version of touch screen, it still should work with the old driver but in an uncoordinated way. So your spare part might be defective or badly connected. There's a little chance you have only driver issue (and the new one will solve it) but not that much.

stiaconi

bencebacsi replied at 2016-9-24 23:13
There has never been GPS issues on the software side, I told that many times. Even if you don't be ...

sorry if it's not a software problem then it is hardware ??
I have to calibrate the compass whenever and Maps loses signal every 20 sec.
what can i do?? please

DENYS2222

\n\n

bencebacsi replied at 2016-9-24 23:17
If you got the new version of touch screen, it still should work with the old driver but in an unc ...

I flash all the roms and its doing the same thing it still  work  but in an uncoordinated way. A way that i cant use the phone. So do i have to send it back to china or wait for new rom to flash? and thanks my friend.

MarcinP

Hi everyone.

Hi
1. After last update I found that when phone is on flat surface (table, seat, chair, etc) screen won't respond or hard to respond, you need put phone in to hand or on legs. Is there any body sensor on back of phone to picked up where phone is put?
2. The light sensor is working fine but I found that in the gray,  dark and at night is showing same value 0,0 lux and won't adjust screen brightness. Is that possible to fix in next update? I compare to other phones and in others showing different values as at gray light (evening) around 50-200 lux. Or if you using phone at night is 0.0 lux and then you switch on any light still is showing 0.0 lux and won't adjust brightness.
3. Is possible to remove one short cut for Sim card data switch on and replace with Hotspot as on short cut list is two Sim card data switches but there is no hotspot
4. I found that when phone is in deep sleep mode sometimes power button won't wake up phone or is taking long time to wake up phone
5. I found that CPU-Z app is showing wrong cpu data and most times will freeze up phone and then phone will reboot it self. As in information book says that there is 4 * 1,2 GHz and 4 * 2,0 GHz cpu-s but cpu-z could show that five or six has 1950 GHz.
6.Camera is fine (is definitely improved) I dont have any issues but one could be changes as when battery is under 15% flash wont work and flash light is working ,for me this is strange. Could you change that the flash is working never mined what charge level is battery
Bencebacsi could you tell me is possible fix all this issues with this update or maybe next ota update will include this fixes or ever those issues will be fixed?
I just wondering is spft update safe? As in last update posts one post is about screen calibration problem after update (and he checked others softwares and other spft and since update touch is uncalibrated)
Many thanks for answer.