This is the SP Flash Tool version of the v3.01_20160607 firmware for UMI Super
Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process! UMI Super receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricekd your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.
Cahngelog: - Navigation button setting is on Short cut
- Camera optimization - Auto focus capture speed is 20% faster. Low light imaging is overall improved up to 35%.
- Fingerprint Scanner is even faster (about 20% enhencement)
- Improved battery life
Resources:
ROM: 20160607_c239v55_kw_u1.rar - Extract the .rar file before use. The scatter file (MT6755_Android_scatter.txt) is inside the extracted folder, together with the other elements
Here's an optional solution to start the flashing process on your UMI Super if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop. 1. Connect your UMI Super to USB. 2. Start the flashing process with the Download button in the flasher app. 3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds. 4. Wait until the flashing process finishes.
|