Install custom recovery (TWRP, CWM etc.) and root

lobyte · Post time 2019-8-25 19:55:44

Official TWRP for Umidigi: http://twrp.me/Devices/Umidigi/

Krissi · Post time 2019-9-30 08:51:05

Edited by Krissi at 2019-9-30 18:21

Hi

I have an UMIDIGI F1 where I get this error when trying the Flash Tool -> Download process:
PMT changed for the ROM; it must be downloaded.
Please select "Format All + Download" scene and try again

To try to solve it I have:

rebooted in fastboot and runned the fastboot command: fastboot flash recovery recovery.img
tried the adb command from within recovery mode: adb sideload recovery.img
unlocked the bootloader successfully
with unlocked bootloader tried the Flash Tool, fastboot and adb installation procedure again

But I still get the error

Note that on the latest F1 ROM page it is stated:
If you get a ''PMT changed for the ROM...'' error message, please use the scatter file from the first ROM version, or flash your phone in Firmware Upgrade mode. Please NEVER format your phone, not even if the flasher app (or your friend, a website etc.) recommends you that! NEVER choose the Format All + Download mode!!!
I have tried all scatter files from early 2019 and that doesn't work... argghhh

Any help would be much appreciated!!!

Current ROM: UMIDIGI F1 V1.0_20190904

sanwris · Post time 2019-10-23 22:43:20

Umidigi power TWRP will be add?

Luna4 · Post time 2019-10-26 20:04:40

Edited by Luna4 at 2019-10-27 21:00

Hello everyone, I have received my UMIDIGI POWER European version and as much as I try I do not get the custom recovery TWRP 3.3., Every time I try it stays in bootloop.
What am I doing wrong or, is there a different version of the TWRP for the UMIDIGI Power.E V1.4 20190829 or if to implant the TWRP I have to flash another version. Please help.
Thank you PS: I have followed the common fastboot procedure that worked with my previous UMIDIGI F1, changing the TWRP logically, but with good results unlike the UMIDIGI POWER.

sanwris · Post time 2019-11-20 05:37:15

Edited by sanwris at 2019-11-23 21:35

please please make umidigi power for working TWRP

Please upload really appreciate

willy2713 · Post time 2019-12-7 08:31:33

Red state
¨Your deice has failed verification and may not work properly. please download boot image with correct signature or disable verification boot¨

please help me i tried on umidigi power and now it just die

willy2713 · Post time 2019-12-7 08:35:24

your device has failed verification and may not work properly. please download boot image with correct signature or disable verified boot.

please help me with this problem on umidigi power, i cant use the phone.

sanwris · Post time 2019-12-28 12:37:19

Hi see TWRP for umidigi power upload in pege I'm afred try it's out please tell me it's working without issue please

sanwris · Post time 2019-12-28 12:51:12

willy2713 replied at 2019-12-7 08:35
your device has failed verification and may not work properly. please download boot image with corre ...

Halo did you use this TWRP ? TWRP_3.3.1by_nemo-nemo.img/
Or different one please tell me

defvs · Post time 2020-1-6 04:54:46

Anyone knows how to unlock the bootloader on Umidigi F2 ? When doing fastboot flashing unlock, it says Unrecognized command flashing unlock