Phone Stuck On boot, Out of Options.

x01kirbyx

hello, my umi fair phone was in my bag switched off and when i took it out and powered it up it wouldnt turn on, charged it all night still nothing, so i did some searching and it turned on into recovery mode (power and volume up) and it put me into a screen prompting me to "Select boot Mode" (VOLUME_UP to select.  VOLUME_DOWN is OK.) then the options where Recovery Mode, Fastboot Mode, and Normal Boot. however whenever i select one of these options i just get a black screen. (im selecting it properly with vol down button) so it resulted me to go deeper... so i first tried seeing it i could root it or something to maybe jumpstart it or something but all i got was errors so then i went and tried to flash it, i know i needed the device drivers, which i assume i found as its soo hard to find the umifair usb drivers to work on windows 10 x64 and got a custom and default rom and followed 3 flashing tutorials however nothing happend no bar on the flashing programs i used. so i kinda hit a dead end and cant think of any other options so i was hoping someone could help me. -thanks in advance.

Frank_nl

You could have a look at this site, it has the right driver installing software there which I guess you could try out (if you havent already):
http://community.umidigi.com/thread-2669-1-1.html

bencebacsi

Direct link to UMI Fair ROM download with proper driver and flasher app is here:
http://community.umidigi.com/for ... peid%26typeid%3D105

x01kirbyx

\n\nno it hasnt worked, im guessing its to do with connecting it to my pc as i cannot get it to be detected by pc. ive correctly manually installed the drivers (MT65xx) but still nothing. my usb cable im using is from my samsung s5 but i gathered they did the same effect as it works with my s5 as i tested to see if it was that too. the phone got slightly waterdamaged. was wondering if that may be why it starts up just the boot menu but doesnt load anything ells or get connected properly. was wondering if a part inside the phone got damaged but part of it is working, that may be why

foyonet

I have the some problem, but no one here can help us,

when I try to use SP flash to flash my phone I got this error
brom ERROR s_ft_download_fail (0XFA8
or
BROM ERROR s_ft_download_fail (4008)

so what is the real problem