UMIDIGI A13 Pro Max 5G V1.0_20230110 ROM - SPFT release

bencebacsi

This is the SP Flash Tool release of the

V1.0_20230110 system software

for UMIDIGI A13 Pro Max 5G

Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI A13 Pro Max 5G receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.

Changelog:

• Random reboot issue fixed
• Other minor bug fixes and system improvement
  

FOTA version: UMIDIGI_A13_Pro_Max_5G_V1.0_20230110_20230110-1336

--------------------------------------------------------------------------------
SP Flash Tool
Resources:

Flashtool tutorial: http://bit.ly/SPFTguide

ROM: >>> UMIDIGI_A13_Pro_Max_5G_V1.0_20230110.rar <<<

Extract the .rar file before use. The scatter file (MT6877_Android_scatter.txt) is inside the extracted folder, together with the other components.

SPFT: SP_Flash_Tool_v5.2216.rar

VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.


Here's an optional solution to start the flashing process on your UMIDIGI A13 Pro Max 5G if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your phone to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and hold the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.



Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

filipesilv_a

UMIDIGI A13 PRO MAX 5G
ola amigos, tentei fazer o procedimento com essa rom nova, persiste em travar nos 39% do processo md1img_a por favor alguem poderia me ajudar estou com celular morto, ja tentei as 3 roms, nas 3 trava no mesmo processo ja nao sei mais oque fazer...por fim ele aparece esse erro da 2º imagem, tem 1 semana que estou com o aparelho ele estava reiniciando sozinho e por fim um dia nao ligou mais.

bencebacsi

filipesilv_a replied at 2023-2-3 06:01
Edited by filipesilv_a at 2023-2-3 06:41  

UMIDIGI A13 PRO MAX 5G

Hi,

If the flashing process always crashes exactly at 39%, then the partition structure of your phone might be damaged. Try to flash your phone in 'Firmware Upgrade' mode (not in 'Download Only'), that can rewrite the partition table as well.

Regards, Ben

filipesilv_a

bencebacsi replied at 2023-2-3 20:32
Hi,

If the flashing process always crashes exactly at 39%, then the partition structure of your ph ...

Ola amigo, tentei o processo em Firmware Upgrade, mas quando o celular e reconhecido aparece a seguinte mensagem

bencebacsi

filipesilv_a replied at 2023-2-3 20:43
Ola amigo, tentei o processo em Firmware Upgrade, mas quando o celular e reconhecido aparece a seg ...

The error message suggests that, you're either trying to flash an incompatible ROM (your phone is not a UMIDIGI A13 Pro Max 5G) or the preloader of your phone is damaged. If you are sure, you have an original UMIDIGI A13 Pro Max 5G, then try to first flash only the preloader partition (uncheck everything else), then flash again in Firmware Upgrade mode. If there's a blue EEA label on the box of your phone, then please flash the EEA version or wait for its update. That will be released in a few days.

filipesilv_a

bencebacsi replied at 2023-2-3 21:00
The error message suggests that, you're either trying to flash an incompatible ROM (your phone is n ...

ola fiz o processo de carregar somente o preloader e deu sucesso, porem na hora de fazer flash "firmware update" persistiu em crash no processo md1img_a 39% segue imagens comprovando ser o UMIDIGI A13 PRO MAX 5G

bencebacsi

filipesilv_a replied at 2023-2-4 06:40
ola fiz o processo de carregar somente o preloader e deu sucesso, porem na hora de fazer flash "fi ...

Then it might be such a rare case when the flash chip of your phone (the hardware) is defective. As a last chance, I recommend you to try to flash your phone using another USB cable and computer but if you still experience the same error, then you should contact your seller for a replacement.

filipesilv_a

bencebacsi replied at 2023-2-4 07:07
Then it might be such a rare case when the flash chip of your phone (the hardware) is defective. A ...

obrigado pela ajuda, irei tentar por outro computador com outro cabo, após fazê-lo volto a comentar

marisaleh

I managed to root the phone with this rom successfully

The problem that I am having is :

I can't change selinux mode from Enforcing to Permissive

I need to be able to do that so that I can flash sound mods on it

Any help with that I'll be grateful as I have tried all the existing
methods even terminal commands like setenforce And none of it works

I think that the problem is with android 12 security