UMi Zero

bencebacsi Post time 2021-3-10 08:37:54 | Show all posts |Read mode [Copy link]
0 246
View: 246|Reply: 0

UMi Zero

[Copy link]
Post time 2021-3-10 08:37:54 | Show all posts |Read mode

zero.png
This is the SP Flash Tool release of the
V3.1_20150104 system software
for UMi Zero

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!






--------------------------------------------------------------------------------
SP Flash Tool
Resources:

Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6592_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.


Here's an optional solution to start the flashing process on your UMi X3 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMi X3 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list