UMIDIGI A7-A11, BISON and Power 5: Repair IMEIs, MEID and Google certificate

bencebacsi Post time 2021-9-29 16:32:52 | Show all posts   [Copy link]
94 30466
Author: bencebacsi

UMIDIGI A7-A11, BISON and Power 5: Repair IMEIs, MEID and Google certificate

  [Copy link]

0

threads

7

posts

26

credits

New Member

Rank: 1

credits
26
Post time 2021-7-14 03:48:46 | Show all posts
Edited by Merf_tj at 2021-7-14 03:50  

Umidigi Bison 2020 error, help
Captura de Tela (76).png

0

threads

3

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2021-7-14 12:59:47 | Show all posts
I did the whole process on my A9 Pro, 2G and 3G networks work normally, however when I switch to 4G it locks up in frequency and I can't select another network and I can't make calls 4G, I've tried everything and I couldn't solve , if someone with a good heart has any original or modified Nvram file and can put it here, I'm very grateful, I think that's the only way to solve this problem

0

threads

3

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2021-7-15 00:11:59 | Show all posts
I found that the problem is that the nvram file after formatting does not work for all bands, most of them get an error, I tested them one by one by
*#*#3646633#*#* and I realized that the 4G 'voLTE' bands no longer work in my country, this happens with many other frequencies, ie the rewritten file is not equivalent to the original

0

threads

7

posts

26

credits

New Member

Rank: 1

credits
26
Post time 2021-7-15 00:12:43 | Show all posts
Merf_tj replied at 2021-7-14 03:48
Edited by Merf_tj at 2021-7-14 03:50  

Umidigi Bison 2020 error, help

Sorted out. I installed the Bison 2021 version ROM (UMIDIGI BISON-6R_V1-0_20210621) and used its SN_Wrinter (SN_Writer_Tool_exe_v1.2020.0.0-4362_BISON2021_6GB). Afterwards I installed the ROM version of my Bison 2020 (UMIDIGI_BISON_V1-0_20201124) and by it I was updating it to the latest version.
I just couldn't put the serial number, if anyone knows help me, please.

0

threads

5

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2021-8-8 15:14:22 | Show all posts
не скачиваеться ! что делать? где скачать?   SN_Writer_Tool_exe_v1.2020.0.0-4362_BISON2021_8GB.rar

0

threads

5

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2021-8-9 19:27:00 | Show all posts
BISON 2021 8 ГБ: SN_Writer_Tool_exe_v1.2020.0.0-4362_BISON2021_8GB.rar не могу скачать! пустая страница открывается и все! помогите!

0

threads

5

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2021-8-10 00:45:07 | Show all posts
как мне востановить серийный номер который есть на наклейке! случайно отформатировал телефон! ?

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2021-8-15 15:36:47 | Show all posts
Hi everyone

I'm just going to answer few posts about missing mobile frequencies and unability to make or receive calls (altough sms and data works fine).
It is possible that you somehow deleted/formatted modem database. So now when your phone tries to make connection to nearest cell, it doesn't know what signal strength/angle/etc. to use. It is only affecting calls because in most countries SMS/data and other things are handled as digital stream nowdays.

For mediatek chipsets you need Modem meta application ( http://www.mediafire.com/file/u1 ... er_10.1844.0.01.zip ). This can access your modem on several mediatek chipsets (I tested on umidigi bison 2020).
-You need to have standard USB VCOM drivers installed (so if you are able to work with SP flash tool or SN writer, you'll be fine with this tool as well)
-Run meta.exe (with phone unplugged and turned off)
-Platform type = Smart phone, Com port = USB COM
-Click connect , connect your phone turned off (same as when using SP Flash tool/ SN Writer)
-Len meta go throught connection process, wait for "Connected" to appear in lower left corner
-Search bar in upper right -> write UpdateParameter Tool then click on result
-Meta asks to Load DB file -> Select "From Target"
-Now a UpdateParameter window appear. I strongly recommend to use "export" button first. This will dump and preserve your current modem settings in case something go wrong. Click "export", name output file and save it somewhere on your PC.

-If you open file you just exported in notepad, you will see your current modem dump. If if looks barren with lots of zeroes all around, so like this:
[DCS1800 EPSK inter slot ramp]
EPSK EPSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
EPSK GMSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
GMSK EPSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
GMSK GMSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
[DCS1800 level, ramp]
APC dc offset = 0
APC lowest power = 0
Battery compensate, high voltage, high temperature = 0.00000
Battery compensate, high voltage, low temperature = 0.00000
Battery compensate, high voltage, mid temperature = 0.00000
Battery compensate, low voltage, high temperature = 0.00000
Battery compensate, low voltage, low temperature = 0.00000
Battery compensate, low voltage, mid temperature = 0.00000
Battery compensate, mid voltage, high temperature = 0.00000
Battery compensate, mid voltage, low temperature = 0.00000
Battery compensate, mid voltage, mid temperature = 0.00000
Low APC dc offset = 0

and so on...
Then you can see your problem (missing modem data, so no useful settings are loaded for any working frequency and your modem won't know how to connect to mobile cells in your vicinity (no IMEI or any other code change will resolve this.)

So how you can repair your phone? You need correct modem settings. Umigidi certainly has them, because obviously they are flashing them in factory. After some search i found modem settings for Umidigi A9 which has the same RF Chip ID (RF_ID_MT6177) that my bison used for testing has. So I opened A9 settings and copy-paste all sections with identical headers to my broken bison modem dump. So for example if my broken dump from bison has a section called

[GSM850 EPSK inter slot ramp]
EPSK EPSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
EPSK GMSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
GMSK EPSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
GMSK GMSK inter slot ramp = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
RF Chip ID = RF_ID_MT6177

Then I replaced it with section from A9

[GSM850 EPSK inter slot ramp]
EPSK EPSK inter slot ramp = 255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
EPSK GMSK inter slot ramp = 255,255,255,255,0,0,0,0,0,10,25,50,100,180,228,255
GMSK EPSK inter slot ramp = 255,232,160,50,25,0,0,0,0,0,0,0,255,255,255,255
GMSK GMSK inter slot ramp = 255,228,180,100,50,25,10,0,0,10,25,50,100,180,228,255
RF Chip ID = RF_ID_MT6177

Let me remind you that you are doing this on your own risk, I strongly don't recommend copy-pasting values for different RF Chip IDs as different hardware may react differently to same setting and you cas damage your hardware. If you can, try to obtain your original modem settings from Umidigi.

Anyway, when you will have a functional modem settings ready, then you can flash them with meta.
-In the updateParameter tool we talked about before press "import", locate correct modem settings ini file on your PC a click "open"
-In the updateParameter tool click on "Write" and let meta write new settings to your phone
-When you see DONE: write data to target then you are finished. Unplug your phone a power it on. Everything should work correctly now.

If you still can't make calls then repeat process and make sure you've done everything correctly. It is possible that you flashed incompatible modem settings and need to find/make another.

Hope this helps all of you that are struggling with calling/receiving calls, because it is usually not the IMEI fault.

Reference Umidigi A9 pro modem settings - https://www.mediafire.com/file/uoz066itfqyljd4/A9PRO64GB.ini/file
My modified Umidigi Bison 2020 (6GB/128GB) modem setting that works on my Bison - http://www.mediafire.com/file/67zvd78rppndc8g/Bison_fix.ini

0

threads

2

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2021-9-9 17:40:20 | Show all posts
The OTA update to Android 11 worked fine for several days for my 2021 6G Bison then on a restart seemed to go into a boot loop. In trying to flash the stock rom  I accidentally formatted the entire phone. What I need to know is the order needed to flash everything or if it doesn't matter. At present it is an expensive paperweight. Love the phone and would like to get it working again. I believe that I've downloaded the tools required to do this other than the preload binaries. Any help would be appreciated.

0

threads

2

posts

18

credits

New Member

Rank: 1

credits
18
Post time 2021-9-29 16:32:52 | Show all posts
Hello,

I get stuck on this:
image.png
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list