UMIDIGI A7 PRO 128GB V1.0_EEA_20200528 ROM - SPFT release

bencebacsi Post time Yesterday  19:14 | Show all posts [Copy link]
5 6801
View: 6801|Reply: 5

UMIDIGI A7 PRO 128GB V1.0_EEA_20200528 ROM - SPFT release

[Copy link]
Post time 2020-6-2 10:59:38 | Show all posts |Read mode
This is the SP Flash Tool release of the
V1.0_EEA_20200528 system software
for UMIDIGI A7 Pro 128GB
European version for EEA countries


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI A7 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
First release for manufacturing



--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6763_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.


Here's an optional solution to start the flashing process on your UMIDIGI A7 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI A7 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

11

posts

38

credits

New Member

Rank: 1

credits
38
Post time 2020-6-2 20:59:57 | Show all posts
is this rom works on 64GB versions?

Comments

No, it doesn't.  Post time 2020-6-13 07:01

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2020-7-4 05:03:23 | Show all posts
Hi,
face unlock stopworking (cannot even launch the system "app")
OTA update (610 only offered) failed at about 25% after reboot. SAme behvoir with local update.
cannot use flash recovery (does not have PC)
weird behavior

0

threads

5

posts

36

credits

New Member

Rank: 1

credits
36
Post time 2020-7-16 00:58:57 | Show all posts
jaarvin replied at 2020-7-4 05:03
Hi,
face unlock stopworking (cannot even launch the system "app")
OTA update (610 only offered) fail ...

I had the same version and also down swipe om start screen gives problems. The only way is to flash with firmware update.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time Yesterday  19:14 | Show all posts
O meu Umidigi A7 pro, está com Boot Loop, já coloquei a última Rom via cabo USB, mas está da mesma forma, reiniciando sozinho.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list