UMIDIGI X (EU) V1.0_20200511.V3.06 ROM - SPFT + OTA release

bencebacsi Post time 2020-6-17 23:31:54 | Show all posts [Copy link]
18 3570
View: 3570|Reply: 18

UMIDIGI X (EU) V1.0_20200511.V3.06 ROM - SPFT + OTA release

[Copy link]
Post time 2020-5-14 00:38:39 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.0_20200511.V3.06  system software
for UMIDIGI X
European version for EEA countries


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI X receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Camera HDR effect optimized
  • Black screen issue when using in-screen fingerprint unlock fixed
  • Other minor bug fixes and system optimization

FOTA version: UMIDIGI_X_E_V1.0_20190919_20200511-0935


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6765_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.


Here's an optional solution to start the flashing process on your UMIDIGI X if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI X to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

If you accidentally formatted the flash chip of your phone, visit the following thread: Recover fingerprint scanner and Google key Android 9 and 10

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings → System → About phone → Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
It can update version 2020309 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation, you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

8

posts

36

credits

New Member

Rank: 1

credits
36
Post time 2020-5-14 13:47:52 | Show all posts


HAllo,

The bug with the fingerprint sensor has not yet been fixed. As shown in Figure 1, the fingerprint sensor is missing.It should look like picture two. The bug with the missing battery statistics has been fixed. Thanks a lot.

Pic1

Pic1

Pic2

Pic2
 Author| Post time 2020-5-18 02:49:36 | Show all posts
mh6210 replied at 2020-5-14 13:47
HAllo,

The bug with the fingerprint sensor has not yet been fixed. As shown in Figure 1, the fing ...

Hi,

Some apps still don't support in-screen fingerprint scanners but most of them do. it's not about the system software of your phone, those apps should get updated. The running app can activate the fingerprint scanner, not the system itself "perceives" if an app is thinking about using the fingerprint scanner. If an app dos not call the fingerprint scanner, the scanner will not be activated.

0

threads

1

posts

10

credits

New Member

Rank: 1

credits
10
Post time 2020-5-18 15:20:20 | Show all posts
Android 10 wen, or is it coming at all <3

0

threads

30

posts

120

credits

Senior Member

Rank: 2

credits
120
Post time 2020-5-31 13:09:32 | Show all posts
когда вы выпустите его на андроид 10

0

threads

8

posts

36

credits

New Member

Rank: 1

credits
36
Post time 2020-6-4 12:38:37 | Show all posts
Hello, again the topic of fingerprint sensor.
After yesterday's update from the Bitworden app, the fingerprint sensor is no longer working.
There are now four apps with which the fingerprint sensor worked and are no longer. The app developers say that google has changed something. Please fix the error, why do I have a fingerprint sensor if it doesn't work?

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2020-6-4 23:43:28 | Show all posts
Hola, con esta actualizacion la bateria dura menos que antes y el telefono se calienta muchisimo.

0

threads

30

posts

120

credits

Senior Member

Rank: 2

credits
120
Post time 2020-6-5 23:45:40 | Show all posts
jareposo replied at 2020-6-4 23:43
Hola, con esta actualizacion la bateria dura menos que antes y el telefono se calienta muchisimo.

я подтверждаю

0

threads

8

posts

36

credits

New Member

Rank: 1

credits
36
Post time 2020-6-7 13:13:07 | Show all posts

I can also confirm that.
It got so hot during charging that I got a message and rebooted it.

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2020-6-17 23:31:54 | Show all posts
Edited by jareposo at 2020-6-17 23:35  

También existe un problema con el cambio de 4G a 3G, cuando cambia por mala cobertura, 4G se corta y te deja sin señal hasta que localice la señal 3G. Y sigue calentandose mucho cuando está cargando, incluso envia el mensaje de "apagar por sobrecalentamiento", esto es un desastre !!!
12Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list