UMIDIGI X (EU) V1.0_20191024.V3.03 ROM - SPFT + OTA release

bencebacsi Post time 2019-11-12 21:36:23 | Show all posts [Copy link]
49 9080
Author: bencebacsi

UMIDIGI X (EU) V1.0_20191024.V3.03 ROM - SPFT + OTA release

[Copy link]

2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-10-30 19:43:03 | Show all posts
bencebacsi replied at 2019-10-30 02:44
After an unsuccessful flashing, keep your phone connected, start again the download, then press an ...

did everything as you wrote. when you press the power button after 5 seconds, a window appears with the error 0xC0010001. There is no red boot bar.
if you remove the cable from the phone and then reinsert it, the port is disconnected in the COM3 device manager, but an unknown USB device appears (device descriptor failure). When you press the power button on the phone for another 5 seconds, the COM3 port appears again, which is constantly on, then off, as at the beginning
DUMP
 Author| Post time 2019-10-30 22:32:32 | Show all posts
maxussr replied at 2019-10-30 19:43
did everything as you wrote. when you press the power button after 5 seconds, a window appears wit ...

Since your phone is identified as 'MediaTek USB Port (COM3)', it doesn't have a working preloader or SPFT can not boot it up. Can you flash other, MTK chipset based phones with that computer?

2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-10-31 05:22:44 | Show all posts
bencebacsi replied at 2019-10-30 22:32
Since your phone is identified as 'MediaTek USB Port (COM3)', it doesn't have a working preloader  ...

I do not have other phones with MTK chipset. Windows 10 build 1903. Installed 3 months ago. I will check on another computer for a week.

2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-11-4 01:12:47 | Show all posts
bencebacsi replied at 2019-10-30 22:32
Since your phone is identified as 'MediaTek USB Port (COM3)', it doesn't have a working preloader  ...

I checked everything on the new system. The result is the same. COM3 port is not flashing. And the other port has no drivers. Where to download them? In "MTK_Driver_Auto_Installer_SP_Drivers_20160804" they are not !!!




Desktop Screenshot 2019.11.03 - 19.55.55.42.png
Desktop Screenshot 2019.11.03 - 19.53.57.19.png
Desktop Screenshot 2019.11.03 - 19.53.20.37.png
 Author| Post time 2019-11-4 07:14:13 | Show all posts
maxussr replied at 2019-11-4 01:12
I checked everything on the new system. The result is the same. COM3 port is not flashing. And the  ...

When you see the MediaTek COM port in your device list, right click on it, and remove device with uninstalling its driver. Then try to connect your phone again. Repeat this procedure if needed. It's your machine that I don't know, other hardware drivers may cause unwanted conflicts.

0

threads

4

posts

24

credits

New Member

Rank: 1

credits
24
Post time 2019-11-7 22:27:46 | Show all posts
Edited by BrunoCr at 2019-11-8 16:30  

Edited by BrunoCr at 2019-11-8 03:38  

App name: BNP Paribas
Fp scanner worked: yes

App name: KeePass Password Safe
Fp scanner worked: no
App name: LastPass
Fp scanner worked: yes

App name: Paypal
Fp scanner worked: yes

There is some places in the Android System itself where FP cannot be used and the phone requires PIN, like when adding a verified BT device for permanently unlocking the phone. If you need more info I can provide info.



2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-11-9 16:23:07 | Show all posts
bencebacsi replied at 2019-11-4 07:14
When you see the MediaTek COM port in your device list, right click on it, and remove device with u ...

When installing your MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe drivers, USB devices are cleaned. The above tips do not help, since there are no drivers for the second type of connection (not COM3). Or the phone does not allow to connect. I think that it is necessary to disconnect the battery, but for this it is necessary to open the case.

take a photo (or rather video) how to flash a phone with a bootloop

0

threads

31

posts

124

credits

Senior Member

Rank: 2

credits
124
Post time 2019-11-10 00:27:45 | Show all posts
Edited by gennadiv at 2019-11-10 10:52  

после прошивки 28.Вер. 2. 01.ПАЛЕЦ.rar не работает на фото панорамная сьёмка пишет cant connect to the camera.пожалуйста, не забудьте закрыть другие приложения, которые могут использовать камеру или фонарик
Screenshot_20191110-094955.png

0

threads

3

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2019-11-10 12:08:14 | Show all posts
Hello.
Hello my son yesterday dropped my phone (umidigi x) and the phone no longer turned on the power.

When I try to flash the phone pops up this error: status_da_hash_mismatch (0xC0070004)

Does anyone know how to solve this?


Thanks in advance

problem

problem

0

threads

67

posts

304

credits

Platinum Member

Rank: 3Rank: 3

credits
304
Post time 2019-11-12 21:36:23 | Show all posts
vir_silva replied at 2019-11-10 12:08
Hello.
Hello my son yesterday dropped my phone (umidigi x) and the phone no longer turned on the po ...

Hello,
Some phones when droped activate a security system
that doesn't allow turning on the phone.
To desactivate it you must disassembly the phone
and disconnect the battery.
Reassembly the phone and it must turn on.
12345Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list