UMIDIGI X (EU) V1.0_20191024.V3.03 ROM - SPFT + OTA release

bencebacsi Post time 2019-10-29 04:45:31 | Show all posts [Copy link]
49 7793
View: 7793|Reply: 49

UMIDIGI X (EU) V1.0_20191024.V3.03 ROM - SPFT + OTA release

[Copy link]
Post time 2019-10-26 21:41:20 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.0_20191024.V3.03 system software
for UMIDIGI X
European Version


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI X receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Camera performance improved
  • In-screen fingerprint unlock optimized
  • Other minor bugs fixed and system optimized

FOTA version: UMIDIGI_X_E_V1.0_20190919_20191025-1654


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6765_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI X if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI X to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings → System → About phone → Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
It can update version 20190925 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation, you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
 Author| Post time 2019-10-29 10:56:05 | Show all posts
Dear Users,

Enabling the fingerprint scanner for app authentication/login is in progress. Now we have a beta release that worked properly with the following apps:
PayPal, TransferWise, Revolut, Curve, aWallet Cloud, myCartaBCC, Blockchain, Bol.com, Coinbase, BNP Paribas Fortis: Easy Banking App, Hello Bank!, ItsMe, Keytrade Bank, KBC Mobile, N26, Payconiq, Remote Fingerprint Unlock, 1password, ASB Mobile Banking

If you don't mind to lose your user data and are willing to flash your phone with SP Flash Tool, please flash this beta version, and check the fingerprint scanner with your apps. You must flash all partitions, and flashing in Firmware Upgrade mode is recommended.

ROM: http://www.mediafire.com/file/b2 ... 28.V2.01.FINGER.rar

Please note, after flashing this version, you'll need to flash an official version again in order to be able to receive wireless updates. that can be either the next official version or the one in this thread.
After testing, please come back with the result.
App name:
Fp scanner worked: yes/no

Sincerely yours, Ben

Comments

я поддерживаю обновление до версии 10 и исправление некоторых не работающ.....  Post time 2019-11-15 12:53
I appreciate the work you have done. Are there any updates planned for android 10?  Post time 2019-11-2 06:48

0

threads

3

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2019-11-10 12:08:14 | Show all posts
Hello.
Hello my son yesterday dropped my phone (umidigi x) and the phone no longer turned on the power.

When I try to flash the phone pops up this error: status_da_hash_mismatch (0xC0070004)

Does anyone know how to solve this?


Thanks in advance

problem

problem

2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-10-27 02:36:12 | Show all posts
Hello. Update came by OTA. After that, the phone rebooted several times and disconnected. It does not turn on, the screen does not glow. What to do?
 Author| Post time 2019-10-27 03:04:24 | Show all posts
maxussr replied at 2019-10-27 02:36
Hello. Update came by OTA. After that, the phone rebooted several times and disconnected. It does no ...

Hi,
Flash your phone with SP Flash Tool. If you want to keep your user data, first flash without the userdata partition but if your phone still can't boot up, you need to flash in firmware upgrade mode.

0

threads

76

posts

414

credits

Platinum Member

Rank: 3Rank: 3

credits
414
Post time 2019-10-27 03:19:25 | Show all posts
this update do not fix the fingerprint issue you can not still open any bank apps its frustrating..

0

threads

1

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2019-10-27 06:53:56 | Show all posts
Edited by Kapitanaz0 at 2019-10-27 06:55  

hello with the update my battery ran out and it takes almost two hours to charge and 89% goes someone else has this problem

0

threads

7

posts

69

credits

Senior Member

Rank: 2

credits
69
Post time 2019-10-27 14:41:37 | Show all posts
Hello UMIDIGI
the OTA upgrade workes, but fingerprint login still does not work in Apps.
What has been "optimized" ???
When will the fingerprint login in apps be fixed?

2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-10-27 20:00:21 | Show all posts
bencebacsi replied at 2019-10-27 03:04
Hi,
Flash your phone with SP Flash Tool. If you want to keep your user data, first flash without th ...

I did everything according to the instructions. gives an error message Desktop Screenshot 2019.10.27 - 14.27.46.30.png




1

threads

17

posts

75

credits

Senior Member

Rank: 2

credits
75
Post time 2019-10-28 07:10:31 | Show all posts
Changelog please. Full log, not the abbreviated one above.

2

threads

10

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2019-10-28 18:01:40 | Show all posts
bfef replied at 2019-10-28 07:10
Changelog please. Full log, not the abbreviated one above.

https://drive.google.com/open?id ... J5xZE4aMmb8wd59OF8M log folder
 Author| Post time 2019-10-29 04:45:31 | Show all posts
maxussr replied at 2019-10-27 20:00
I did everything according to the instructions. gives an error message

Your phone doesn't even have a working preloader. Please try to first flash only the preloader partition, then if you were successful, the full ROM. Please never try to flash your phone in Format All + Download mode. If you can't flash the preloader partition, please delete your log files, then make only one flashing attempt, and share those log files containing only that one flashing attempt.
12345Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list