UMIDIGI F1 Play V1.0_20190412 ROM - SPFT release

bencebacsi Post time 2021-5-22 03:04:21 | Show all posts     [Copy link]
3 5599
View: 5599|Reply: 3

UMIDIGI F1 Play V1.0_20190412 ROM - SPFT release

    [Copy link]
Post time 2019-4-13 17:17:26 | Show all posts |Read mode
This is the SP Flash Tool release of the
V1.0_20190412 system software
for UMIDIGI F1 Play


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI F1 Play receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Camera improvements
  • Updated certificates


The system will show UMIDIGI_F1_V1.0_20190124 as Build number after this update but the real version is V1.0_20190412
FOTA version: UMIDIGI_F1_V1.0_20190124_20190412-1555


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6771_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI F1 Play if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI F1 Play to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.



Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

5

posts

28

credits

New Member

Rank: 1

credits
28
Post time 2020-11-7 03:20:09 | Show all posts
I would like to put android 10 on my umidigi please

1

threads

22

posts

59

credits

Senior Member

Rank: 2

credits
59
Post time 2021-1-10 14:59:27 From the mobile phone | Show all posts
Can you please post the firmware code as there is a bunch of issues I would like to correct and support seems non existent. Buy the phone and if you have an issue pay to ship it to China. Well this user who has purchased over 19 UMIDIGI phones would like to get more out of them

0

threads

14

posts

54

credits

Senior Member

Rank: 2

credits
54
Post time 2021-5-22 03:04:21 | Show all posts
The F1 is no longer supported. Umidigi needs to release the source code in accordance to the GPL. With a preference on releasing the source code to the hardware such as communications and camera.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list