|
Hello, I am trying this with my F1, but I have the following error code:
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
remove@/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/tty/ttyACM0
open VID device failed!
remove@/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0
remove@/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.1
remove@/devices/pci0000:00/0000:00:13.2/usb2/2-3
add@/devices/pci0000:00/0000:00:13.2/usb2/2-3
add@/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0
add@/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1558798547.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Failed to Connect DA: STATUS_EXT_RAM_EXCEPTION(-1073414139)
Disconnect!
BROM Exception! ( ERROR : STATUS_EXT_RAM_EXCEPTION (-1073414139) , MSP ERROE CODE : 0x00.
[HINT]:
)((ConnectDA,../../../flashtool/Conn/Connection.cpp,146))
Any idea? Thank you!
|
|