What about bokeh effect? On mine after shooting a picture in this mode I get an error message:
"Can't connect to the camera.
Please make sure to close other apps that may use camera or flashlight"
and the camer app crashes
Do you at umidigi test your firmwares before releasing it to public?
Very sorry to hear about your problems. My WiFi works perfectly fine, as does the bokeh effect. However, when I first had the original Z2 I had camera issues as well. It gave me the same error message any time I tried to even open the camera. This was very frustrating but I was able to find the Z2 Pro for a good price. It has been amazing for me. I guess that shows that Umidigi is capable of making a really good phone but their quality control is not as good as it should be. I hope an update fixes your problems.
Make no mistake the wifi in Z2 pro does work from day one. It is just not stable and has difficulty to use the 5Ghz band. If it were able to connect to the 5Ghz it will reports 433Mbps link speed for a very short time but is unable to sustain it. 99% of the time it drifts back to the 2.4Ghz band with 144Mbps link speed. Reboot the phone or forget the 2.4Ghz band seldom able to reinstate the 5Ghz band.
When I replaced it with a Poco F1 the wifi I have been getting is always 5 Ghz at 866Mbps in the same house.
First of all, I made the latest state with Wiress Update.
(V 1.0 - 20180823 - 20181116 - 1715)
After that, the next operation was done in the setting.
Security & location
Screen lock, fingerprint
↓
Screen lock
At this point, the following error appears and can not be set.
Settings has stopped
Open app again
[Copy link]
Peep Card
Radar card
Post time 2018-11-24 19:32:57
Magic mirror
