UMIDIGI One Pro V2.0_20181113 ROM - SPFT + OTA release

bencebacsi

This is the SP Flash Tool + OTA release of the

V2.0_20181113 system software

for UMIDIGI One Pro

Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,

never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI One Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.

Changelog:

• Watermark option added to the Camera app
• No notification bug fixed
• Live wallpaper can't be loaded after reboot bug fixed
• Camera flash light intensity adjusted
• Earpiece and ringtone speaker voulme adjusted
• Font Manager app removed
• Other minor bug fixes and improvements
  

The system will show UMIDIGI_One_Pro_V2.0_20180815 as Build number after this update but the real version is V2.0_20181113

FOTA version: UMIDIGI_One_Pro_V2.0_20180815_20181113-0939

--------------------------------------------------------------------------------

SP Flash Tool

Resources:

Flashtool tutorial: http://bit.ly/SPFTguide

ROM: >>> UMIDIGI_One_Pro_V2.0_20181113.V3.10.rar <<<

Extract the .rar file before use. The scatter file (MT6763_Android_scatter.txt) is inside the extracted folder, together with the other components

SPFT: SP_Flash_Tool_v5.1836.rar

VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI One Pro if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMIDIGI One Pro to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------

OTA (recovery) update

Manual (local) OTA update method instructions

• Copy the downloaded .zip file to the internal memory of your phone
• Go to Settings --> System --> About phone --> Wireless update
• Tap the 3-dot menu button in the top right corner and select Local Updates
• Brows for the ...update.zip file and select it
• Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.
  

Update file for manual OTA update: >>> UMIDIGI_One_Pro_V2.0_20180815_20181113-0939_update.zip <<<

It can update version 20181030 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery

You need a microSD card (with at least 4GB capacity) installed in your phone!

• Copy the ...update.zip file to your SD card.
• Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
• Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
• Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
• Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
• Move to ‘Apply update from SD card’ and select it.
• On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
• After a succcessful installation you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
• Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'
  

Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

Ghost505

Thanks, flashing right now.
Still issue with rear video camera moving slow (low fps).
Still issue with system bar color on dark mode, still dark icons on dark.
Problem/Bug with pinning apps.
Also the animation scale is not saved after restart.
A way to control led notifications.
No stereo effect on music...
Can not control flashlight manually (manual open) in camera mode and that is just WRONG! The flashlight that starts from camera auto, is just ugly, I want to see with flashlight on before taking a picture, to see how it will look, again, it is just.. wrong!


That's too bad, I guess we need a new way to control the fonts.

black on black problem on dark theme + height should be higher where the red line is (most users want this!)

imDCStar

I was really hoping to have notification fixed. Thank you for this update. Some issues yet there i would like to point out:

1- Rear Camera Lag on shake or while capture.
2- The clock on top left is really not needed, that space should be used to show notifications.
3- Raw capture on camera or at least manual controls like ISO and Shutter speed control in camera app will be really helpful.

Thanks again.

EDIT:

Already mentioned by a member that some options in DEVELOPER OPTIONS does not save its state like animation scale is set to 0.5X by default. If i change it to something else (for example 1.0X), after restarting it automatically set to 0.5X.

EDIT2:

Ring Voulume and Notification Volume should be seperate like in other phones.

zusatzmetall

The UMIDIGI One Pro is a beautiful model cell phone, a beautiful design from front to back.
Unfortunately, I can not do too many positive things with this device because I noticed too many negative things within less than 2 weeks.

NEGATIVE:
1. The large battery is discharged too quickly in practice, although I hardly used it, I had to charge it every day.
2. The phone is heavy, very heavy, with the included bumper just over 200g.
3. The camera, whether photos or videos everything jerky and the autofocus drives constantly back and forth.
Reasonable videos or photos can be forgotten.
4. Constantly I had to restart the phone or take out the SD card and put it back in, because it is suddenly no longer there. Very annoying when playing music from SD card or someone wants to show pictures from the map.
5. The phone heats up very quickly when talking on the phone, I have not tested games.
6. The fingerprint sensor works only at 5-7 times or not.
7. The notch display was annoying, with various apps missing some of the text or image, e.g. in the weather app you can not see in the upper part which place it is.
8. The upper speaker is too quiet, both when talking on the phone and when playing music (no real stereo effect, as too quiet.)
9th Security, the security patch is outdated and according to UMIDIGI this will be renewed as soon as it hackers succeed in breaking, WHY wait until you hacked? Why not make a precaution?
10. The translation (that would not really matter to me) has partly remained in English.
11. Depending on which inductive charger one uses, the mobile phone will automatically start typing something arbitrarily on the display and open / close apps.


I have a solution for all my problems with the UMIDIGI one PRO.
I send the device back and buy a reasonable Huawei which is also supported by the manufacturer.

Payme

I have a problem sometimes when someone call the screen is not turning on. It keeps ringing but I can not awnser. Not even clicking power button works. Is this a known issue and is htere something I can do to fix it?
Update.
After help from UMIDIGI it seems the problem was with my proximity sensor. I now recalibrated the sensor with "Proximity Sensor Reset Doctor" app. And now it seem to work.

dawidchelminski

I checked the battery optimization. It's better now. Would developers be able to add "AppLock" to the system?

ruippneves

After the update my 'Camera' app is now called 'OFF'.
It is not compromising but I still wanted to point it out.

Best

Casagrandeeddi

Hello good update, but the security patches of Android must be updated, which are still in place in June, we hope that the updated, thanks.

Andy.Reddy

Nice update - but the important question is:

when will be the current android security update implemented?

SrPhilippe

I'm very happy with the updates but the rear camera still looks laggy.

SrPhilippe

Ghost505 replied at 2018-11-17 19:58
Edited by Ghost505 at 2018-11-17 22:05  

Thanks, flashing right now.

Did you update your phone via FOTA? My phone didn't got me the update

woudell

going an flash now

jack.rg

I have not received the OTA update

woudell

update is great just that my phone unlocks when you swipe up an it has a password an pin also the camera is lagging.

dawidchelminski

I am really pleased with the update.

dawidchelminski

There is no recording of the animation scale (programming options).

woudell

woudell replied at 2018-11-18 23:59
update is great just that my phone unlocks when you swipe up an it has a password an pin also the ca ...

I doubt because use to work well before but I'll check