UMIDIGI One Pro V2.0_20180822 ROM - SPFT + OTA release

bencebacsi Post time 2018-10-6 15:45:25 From the mobile phone | Show all posts [Copy link]
8 3490
View: 3490|Reply: 8

UMIDIGI One Pro V2.0_20180822 ROM - SPFT + OTA release

[Copy link]
Post time 2018-8-29 04:09:04 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V2.0_20180822 system software
for UMIDIGI One Pro

Flash tool operation is recommended to experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI One Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.






Changelog:
  • GMS certificate enabled
  • Minor bug fixes

The system will show UMIDIGI_One_Pro_V2.0_20180815 as Build number after this update but the real version is V2.0_20180822
FOTA version: UMIDIGI_One_Pro_V2.0_20180815_20180822-1843


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Extract the .rar file before use. The scatter file (MT6763_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI One Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI One Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal memory of your phone
  • Go to Settings --> System --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update: >>> UMIDIGI_One_Pro_V2.0_20180815_20180822-1843_update.zip <<<
It can update version 20180815 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

53

posts

289

credits

Platinum Member

Rank: 3Rank: 3

credits
289
Post time 2018-9-5 02:28:35 From the mobile phone | Show all posts
Hi, I had the update, but when the notifications arrive you have to always pull down the curtain, you can solve with the next update, thanks.

0

threads

2

posts

21

credits

New Member

Rank: 1

credits
21
Post time 2018-9-5 15:48:06 | Show all posts
Добрый день, на телефоне не работает FaceID, при добавлении 2 отпечатка пальца телефон перезагружается!
 Author| Post time 2018-9-13 06:21:43 | Show all posts
Casagrandeeddi replied at 2018-9-5 02:28
Hi, I had the update, but when the notifications arrive you have to always pull down the curtain, yo ...

Hi, sorry but that's the normal behavior of the notification area. Since the notch limits the space of the notification bar, you have to pull it down to see the incoming messages. You also can see the notifications on the lock screen if you just press the power button instead of unlocking your phone with the fingerprint scanner.
 Author| Post time 2018-9-13 06:22:43 | Show all posts
gregi replied at 2018-9-5 15:48
Добрый день, на телефоне не работает FaceID, при добавлени ...

Please update your phone to the latest version.

0

threads

4

posts

20

credits

New Member

Rank: 1

credits
20
Post time 2018-9-15 19:16:26 | Show all posts
Edited by sanok007 at 2018-9-15 22:10 \n\nТелефон не включается, при подключении зарядного устройства загорается красный индикатор, больше никаких признаков жизни не подает. Smarpthone can't turn on.

5

threads

89

posts

723

credits

Diamond Member

Rank: 4

credits
723
Post time 2018-9-29 17:26:47 | Show all posts
bencebacsi replied at 2018-9-13 06:21
Hi, sorry but that's the normal behavior of the notification area. Since the notch limits the spac ...

On other devices with a notch (Asus Zenfone 5 for exemple) you can still see some notifications (a few) it's much more efficient !
I own a One (not pro version) device is ok, but this behavior is not so good...

0

threads

5

posts

24

credits

New Member

Rank: 1

credits
24
Post time 2018-10-6 00:23:46 | Show all posts
Hi. I have problems with one pro. It stopped detect SIM card. I can`t use it as a phone at all.  removed a SIM and installed it again a couple of times, it helped for a day or so and then the phone did not see SIM card again. All your suggestions are welcome, please help with this issue.

0

threads

2

posts

22

credits

New Member

Rank: 1

credits
22
Post time 2018-10-6 15:45:25 From the mobile phone | Show all posts
Please fix bluetooth battery drain. Bluetooth consumes 20% of full charged battery
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list