[A1 Pro] UMIDIGI A1 Pro V1.0_20180601 ROM - SPFT + OTA release

bencebacsi Post time 2018-6-12 05:32:51 | Show all posts  Close [Copy link]
84 16205
View: 16205|Reply: 84

[A1 Pro] UMIDIGI A1 Pro V1.0_20180601 ROM - SPFT + OTA release

 Close [Copy link]
Post time 2018-6-6 18:11:46 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.0_20180601 system software
for UMIDIGI A1 Pro


Flash tool operation is recommended to experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI A1 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.





Changelog:
  • Google GMS certificate issue fixed (you may need to remove, then relogin your google account after installing this update)


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


ROM: >>>>> C390_FE_K8B_UMI_20180601_1838.rar <<<<<
Extract the .rar file before use. The scatter file (MT6739_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI A1 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI A1 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal memory of your phone
  • Go to Settings --> System --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update: >>>>> UMIDIGI_A1Pro_V1.0_20180601_update.zip <<<<<
It can update version 20180525 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
 Author| Post time 2018-6-24 15:34:09 | Show all posts
diomorgan replied at 2018-6-22 09:00
if someoneone has no troubles "adoptingù" his SD card can share the size, brand and kind of ihi SD  ...

Maybe you have a fake Samsung. Can you share the link to the product page where you bought it?

0

threads

4

posts

30

credits

New Member

Rank: 1

credits
30
Post time 2018-6-7 03:17:10 | Show all posts
Root & twrp for this device..??
 Author| Post time 2018-6-11 03:09:57 | Show all posts
asakopak replied at 2018-6-7 03:17
Root & twrp for this device..??

You can root this phone with Magisk Manager using the boot.img file available in the ROM packages. Use the boot.img from the same ROM version that you've installed on your phone.
Root and custom recoveries are never officially supported.

0

threads

7

posts

154

credits

Senior Member

Rank: 2

credits
154
Post time 2018-6-6 21:58:04 | Show all posts
Hello. Please help. Yesterday I bought the A1 Pro Umidigi phone.
After the OTA update, the camera and flashlight disappeared.
I used SN Writer and put in soft from the producer Umi.
Now I do not have a camera, a flashlight and a fingerprint.

How to fix it?

0

threads

2

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2018-6-7 11:04:01 | Show all posts
Wow, atlast my Face unlock worked after this update....Thanks!!!

0

threads

2

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2018-6-7 11:05:12 | Show all posts
base-x replied at 2018-6-6 21:58
Hello. Please help. Yesterday I bought the A1 Pro Umidigi phone.
After the OTA update, the camera an ...

Follow the above and do a complete flash or perform factoy reset, any one should work.

0

threads

7

posts

154

credits

Senior Member

Rank: 2

credits
154
Post time 2018-6-9 23:18:57 | Show all posts
ursnanda replied at 2018-6-7 11:05
Follow the above and do a complete flash or perform factoy reset, any one should work.

Nothing helps. I've tried everything
 Author| Post time 2018-6-11 03:07:41 | Show all posts
base-x replied at 2018-6-9 23:18
Nothing helps. I've tried everything

Hi,
We already discussed your issue on facebook. Your fingerprint sensor will be recovered but the camera problem might be not software related. On the other hand, only formatting your phone can lead to lost the fingerprint scanner, an OTA update never.

0

threads

16

posts

76

credits

Senior Member

Rank: 2

credits
76
Post time 2018-6-11 18:33:33 | Show all posts
Any change of putting Google's June-security update in OTA?

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2018-6-12 05:32:51 | Show all posts
ИЩУ Донорский Backup NVRAM для umidigi a1pro
123456789Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list