Recover dead fingerprint scanner Android 8.1

bencebacsi Post time 2019-10-1 23:09:48 | Show all posts   [Copy link]
307 24841
Author: bencebacsi

Recover dead fingerprint scanner Android 8.1

  [Copy link]

0

threads

3

posts

10

credits

New Member

Rank: 1

credits
10
Post time 2019-8-26 08:44:57 | Show all posts
bencebacsi replied at 2019-8-26 07:39
Hi,
Yes, this service still works and every paid activation request gets the activation file in 2  ...

I already sent the thh.req file and the paypal payment receipt to the mail. Let me know if I don't arrive.
just in case I warn you that it is a s2 lite
 Author| Post time 2019-8-26 15:51:50 | Show all posts
JavierRuella replied at 2019-8-26 08:44
I already sent the thh.req file and the paypal payment receipt to the mail. Let me know if I don't ...

Hi,

I sent you the activation file 2 hours after I received your thh.req file. However, I'm afraid you just threw that amount out of the window. You forgot to read the title of this thread. This activation is only for the listed models running Android 8.1. The S2 Lite is not in the list and is based on Android 7.0. You should just flash a stock ROM (the same version that you have installed on your phone) but if that doesn't fix your fingerprint scanner, then it's a hardware defection.
S2 Lite ROM page: https://community.umidigi.com/fo ... display&fid=186

0

threads

5

posts

26

credits

New Member

Rank: 1

credits
26
Post time 2019-9-11 21:18:02 | Show all posts
Edited by Ressler at 2019-9-15 02:01  

Hello everyone,,
I can confirm, that after receiving my file back from Ben that the fingerprint scanner is working again. Only real problems I had was with drivers on Windows 10 machine, and luckily i had an old Windows 7 laptop laying around that had no problems.

Thanks for your help Ben.

0

threads

60

posts

228

credits

Platinum Member

Rank: 3Rank: 3

credits
228
Post time 2019-9-15 18:00:12 | Show all posts
Edited by Karthikeyan at 2019-9-15 18:08  

Edited by Karthikeyan at 2019-9-15 18:01  

hello ben,


am using z2 pro . is there any method to recover for z2 pro ?

i formated full in mistake. and i tried to create request file using bean tool . am using windows 8.


but it is failed , it shows


15:14:36 IMEI:35932, build date:20171009
15:14:36 IMEI:35932, Set phone into Meta mode
15:14:50 IMEI:359326, Set phone into Meta mode end
15:14:50 IMEI:359326090, Connect to phone
15:15:03 IMEI:359326090, Connect to phone end
15:15:04 IMEI:359326090, Wait soter
15:15:04 IMEI:359326090, Send command to generate req
15:15:05 IMEI:359326090, Send command to generate req end
15:15:05 IMEI:359326090, Read req
15:15:06 IMEI:3593260, Read req error




note : i deleted imei no in this message

0

threads

60

posts

228

credits

Platinum Member

Rank: 3Rank: 3

credits
228
Post time 2019-9-16 18:40:49 | Show all posts
hello ben,

am using z2 pro . is there any method to recover for z2 pro ?
i formated full in mistake. and i tried to create request file using bean tool . am using windows 8.
but it is failed , it shows


15:14:36 IMEI:35932, build date:20171009
15:14:36 IMEI:35932, Set phone into Meta mode
15:14:50 IMEI:359326, Set phone into Meta mode end
15:14:50 IMEI:359326090, Connect to phone
15:15:03 IMEI:359326090, Connect to phone end
15:15:04 IMEI:359326090, Wait soter
15:15:04 IMEI:359326090, Send command to generate req
15:15:05 IMEI:359326090, Send command to generate req end
15:15:05 IMEI:359326090, Read req
15:15:06 IMEI:3593260, Read req error

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2019-9-24 21:47:28 | Show all posts
Karthikeyan replied at 2019-9-16 18:40
hello ben,

am using z2 pro . is there any method to recover for z2 pro ?


Damm even I am having a similar kind of issue, I have searched all over the internet and even have posted on number of threads on different forum, no solution seems to work. I am really frustrated, can anyone of you here help me resolve this issue, I am very much tired now.

0

threads

6

posts

18

credits

New Member

Rank: 1

credits
18
Post time 2019-9-25 15:45:34 | Show all posts
bencebacsi replied at 2019-8-26 15:51
Hi,

I sent you the activation file 2 hours after I received your thh.req file. However, I'm afrai ...

> The S2 Lite is not in the list and is based on Android 7.0. You should just flash a stock ROM (the same version that you have installed on your phone) but if that doesn't fix your fingerprint scanner, then it's a hardware defection.

It is increasingly hard to understand what is what on this forum. While the "title" on this page is very specific, some moderator users are not. I can clearly see a link to this thread from the "S2 Pro" related thread from MarcinP.

0

threads

6

posts

18

credits

New Member

Rank: 1

credits
18
Post time 2019-9-25 16:14:04 | Show all posts
bencebacsi replied at 2019-8-26 15:51
Hi,

I sent you the activation file 2 hours after I received your thh.req file. However, I'm afrai ...

How to restore fingerprint sensor for S2 Pro?

0

threads

3

posts

20

credits

New Member

Rank: 1

credits
20
Post time 2019-9-30 21:59:36 | Show all posts
Hi Ben,

I get the same.  This is the log.

[2019/9/30 14:46:07] microtrust_log: dll version is v1.3.0, read_file_from_phone_to_buffer() line number:748 phone_filepath folder not exist;        return value=1
[2019/9/30 14:46:07] microtrust_log: dll version is v1.3.0, read_file_from_phone() line number:1108 read phone file to buffer failed;        return value=-1

Please any advice?

Andy

0

threads

3

posts

20

credits

New Member

Rank: 1

credits
20
Post time 2019-10-1 23:09:48 | Show all posts
Ben,

I have z2 pro.  Using win10.

I reflashed my device using SP_Flash_Tool_v5.1916
I used SN_Write_Tool_v1.1828.00 to write IMEI, WIFI, BT addresses.  I was not able to make SN_Writer_G37_v1.1752 work to directly to set Metamode.  I can make it work if I have the z2 pro already in Metamode.

Using the Beanpod_Activation_Tool/generate_request_file_tool I get the following error.

15:47:35 IMEI:223344, build date:20171009
15:47:35 IMEI:223344, Set phone into Meta mode
15:47:47 IMEI:223344, Set phone into Meta mode end
15:47:47 IMEI:223344, Connect to phone
15:48:02 IMEI:223344, Connect to phone end
15:48:03 IMEI:223344, Wait soter
15:48:03 IMEI:223344, Send command to generate req
15:48:04 IMEI:223344, Send command to generate req end
15:48:04 IMEI:223344, Read req
15:48:05 IMEI:223344, Read req error

In the microtrust_metalog folder, the imei folder is created but no files are produced other than the log file, which shows:

[2019/10/1 15:48:05] microtrust_log: dll version is v1.3.0, read_file_from_phone_to_buffer() line number:748 phone_filepath folder does not exist;          return value=1
[2019/10/1 15:48:05] microtrust_log: dll version is v1.3.0, read_file_from_phone() line number:1108 read phone file to buffer failed;    return value=-1

Ben please advise why you think the beanpod tool is not able to generate the thh.req file.

Thanks in advance
Andy
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list