SP Flash Tool tutorial

bencebacsi Post time 2020-7-9 18:39:43 | Show all posts     [Copy link]
143 191219
Author: bencebacsi

SP Flash Tool tutorial

    [Copy link]

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2020-2-18 02:10:39 | Show all posts
Hello
I have an umidigi A3. Yesterday out of nowhere the phone reboot itself and go in a reboot-loop. I did an SP flash with ROM A3 V1.4 and now it seems dead. It doesn't turn on and my pc doesn't recognize it when I plug USB cable then I can't either try to flash it again. Any solution? What could I try?

0

threads

2

posts

42

credits

New Member

Rank: 1

credits
42
Post time 2020-2-24 19:00:46 | Show all posts
Is anybody can help what to do to flash firmware if I get ERROR: STATUS_DA_HASH_MISMATCH (0xC0070004)? This is case with Umidigi X phone when I try to flash firmware. Unfortunately the phone doesn't start any more. Even option "Format All + Download" gives the same error.
Is there any option to force the flashing firmware with format form the very begenning?

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2020-3-2 03:24:36 | Show all posts
Hi there. I encountered such a problem. Umidigi A 5 Pro. The battery of the phone has run out of power during the game. When the game was not switched off, a charger was connected to the phone and the phone went off. Continue to not respond to any buttons, turn on, or display nothing. With a connected charger, the battery charges and the phone heats up normally in place of the processor. What kind of failure could it be?

0

threads

2

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2020-4-27 06:41:58 | Show all posts
Edited by felix.sy at 2020-4-27 06:44  

After the flashing process my Umidigi Power 3, that was stuck in bootloop, now only says "dm-verity corruption". I just bought this phone so I did the flash in the "Firmware Upgrade" mode inside the flashtool given. Anyone has a solution to my problem? If I messed up the flash process is there a way to reset it to it's original state and try again?

ps. I used the UMIDIGI Power 3 V1.2 ROM and the SP Flash Tool v.5.1952

0

threads

3

posts

10

credits

New Member

Rank: 1

credits
10
Post time 2020-5-6 02:35:25 | Show all posts
I am trying to flash umidigi AS3 with flash tool and it shows this error STATUS DA HASH MISMATCH. WHAT CAN I DO???

0

threads

1

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2020-5-19 23:32:23 | Show all posts
Hello, I have an Umidigi A5 Pro and, when a buy it was 100% functional... no errors, this was until an upgrade breaks the front camera, so I couldn't use it since then. I got tired of having it broken so I decided to do something.

   - First, a Factory reset... doesn't solve anything.
   - Second, I download this Flash Tool and follow all the instructions for Download Only mode, everything went just fine, except for the camera... again.
   - Third, I use again the Flash Tool to do a Firmware Upgrade with the same result... no camera.
   - Fourth, done a Format All + Download with this Flash Tool and this is when the big problem begans.

As expected, my camera never works, but... in this time, the OS starts to crash in everything, if I start the configuration of Android (inmediately after the flash process), gets stuck at gmail login, if I skip that, gets stuck at password settings, if I skip that, well... we got to the Android main screen. That's fine right? except for the fact that when the phone enters in lock mode (after the screen turns off) and I Wait a few seconds, the phone crash in a way that only the black screen remains with the back button and the top bar (where the clock is)... ONLY SHOWS THAT BECAUSE IT'S FROZEN.

If I try to access the options of the Configuration App (like the password configuration, etc.) the system close everything and tells me that the Configuration App has stopped working and closes it.

I try wiping the cache partition and a Factory Reset and nothing works... What can I do?

Thanks in advance.

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2020-5-21 07:04:24 | Show all posts
Edited by Luciano_Garcia at 2020-5-21 08:49  

Good evening. I am in need of help to recover my power 3, by Flash Tool, when I connect to USB the error code, 0xC003001D, storage end life, appears, I tried it by SD and other modes, the device is not reset from the factory. I would be very grateful if someone gave me a tip.

0

threads

2

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2020-6-2 01:15:40 | Show all posts
Edited by hudsonq at 2020-6-2 01:25  

hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time and a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me

0

threads

11

posts

38

credits

New Member

Rank: 1

credits
38
Post time 2020-6-2 21:20:00 | Show all posts
so userdata must be uncheck at all cost

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2020-7-9 18:39:43 | Show all posts
Hello!

I flashed my udigi with this software and it is only resetting now on umifigi logo. How Can I resolve ist?
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list