SP Flash Tool tutorial

DiegoBohorquez

Mi UMIDIGI BISON entró en un Boot Loop y ahora solo se prende, aparece el logo de BISON y se vuelve a apagar.
He tratado de usar el Flash Tool con la ROM V1.0_20201101, pero no se termina. Uso el Firmware Upgrade, pero me salen los siguientes errores:

Alguien me puede decir cómo proceder, por favor.

bencebacsi

DiegoBohorquez replied at 2021-6-2 11:51
Mi UMIDIGI BISON entró en un Boot Loop y ahora solo se prende, aparece el logo de BISON y se vuelve ...

You get that error message when trying to flash an incompatible ROM. Try to flash a BISON 2021 version.

cilindrico74

Hi please help me.I use sp flashtools on my umidigi F1 but for my mestake I use format+download.
Now F1 is dead its not recognized from windows and do not bot anytime.I dont have my original IMEI.

henris22

my umidigi A9 Pro device shut down by itself, and when it turns on the bootloop and doesn't go into fastboot, could someone help me

YOUR DEVICE HAS BEEN UNLOCKED AND CAN'T BE TRUSTED

ORANGE STATE

cilindrico74

cilindrico74 replied at 2021-6-12 15:53
Hi please help me.I use sp flashtools on my umidigi F1 but for my mestake I use format+download.
Now ...

Please anthing help me.?SPflash tool start the red bar but nothing happens.When I connect the phone it connects and disconnects

Ciccio

Hello,

Please I need help, because by mistake in updating the phone with SP_ Flash_tool I selected Format all + Download ...
Now it doesn't turn on anymore and I can't restore the firmware because I can't access the "download mode" and connecting it as it is SP tool can't download the firmware, only the red bar starts and stops with this error:
https: // drive.google.com/file/d/ ... WC / view? usp = sharing
I have used the correct firmware for my Umidigi A9 Pro 6GB Ram /128GB Rom

Auto solved! Today I have tried again and it worked!
Now I have to restore the IMEI and so on....

cilindrico74

Ciccio replied at 2021-6-21 14:12
Edited by Ciccio at 2021-6-22 00:05  

Hello,

Please but your smartphone driver was recognized by windows ??

Ciccio

cilindrico74 replied at 2021-6-22 01:03
Please but your smartphone driver was recognized by windows ??

Yes, in some way Win10 recognize the phone.I have connected the phone once started the download, and keeped pressed for about 10 seconds the "power on " button....
But after installing (downloaded) the ROM, the phone do not works anyway, is in a boot loop.... I have tried many times to load the rom but never works....

Note:
once the SP-flash have flashed the ROM, I have to reboot win10 to let it works agin for a second flash...

orcakween

jipidou replied at 2018-2-7 00:20
I have the same problem and fixed it.
plug the usb cable then press Power+volup, maintain it for a  ...

i cant turn on my power3 after charging it pls help

orcakween

i finished this process already and got the check mark, but why my power3 still dont turn on!? the umidigi just shows up then suddenly turns off !!!!! whyyyy