S2

bencebacsi

fede451 replied at 2017-12-30 19:26
I did the same, I lost the IMEI after choose Format all+Download.
I could repair the IMEI with the S ...

Did you try to use different SIM cards? Are you sure your SIM card is properly installed?

w84n8

Hi,

since the November Update where e+ and o2 settings have been changed for Germany, i havn't any Data. I've been tried many apn settings without change.
And why do i have Roaming in my Country? You have many other Models on the market without these data Problems for this Provider (in example Umidigi Z).
Please unlock the PLMN settings or enter 26207 for telefonica / drillisch

fede451

bencebacsi replied at 2017-12-31 18:19
Did you try to use different SIM cards? Are you sure your SIM card is properly installed?

Yes, is properly installed. And with it and another SIM card occurs something strange. After several restards, the signal appear, and then it disappear again, and didn`t work anymore. I couldn' find the problem. I flash a previous rom, but still don' work.

S11ton

bencebacsi replied at 2017-12-31 17:45
Basically you expect 60fps interlaced video encoding from this processor, what is not possible. Th ...

Dear friend,I asked 4 questions. Could you please give a clear answer for each of them?


"Basically you expect 60fps interlaced video encoding from this processor, what is not possible"
It is not true, I'm not expected interlaced 60fps video at all. I expect 3840*2160 30p(progressive) as Umidigi has promissed. Now the phone can only capture 30p(progressive) for 1920*1080. Premiere Pro shows real 30 progressive scan frames per second at 1920*1080.



"a variable framrate between 7-42fps"
It's the most horrible thing you could do. That is why recorded videos are not smooth even in good lighting conditions. Them jerk from frame to frame. It would be better to limit the minimal shutter speed less than 1/50 and real progressive frame rate more than 25.


"you can check the fps with any other video editor"
I've already did that. After Effects shows the same 13 fps Interlaced Upper Field video. FFMPEG shows the same. It is professional video editing software, you can trust them for sure!


"why you want to record and edit high quality 4k videos with a cheap smartphone while only a 4k camcorder with such capabilities costs three times more"
I don't want to record high quality 4k videos. I want to record 4k 30p video which Umidigi has promissed during the presale.
FYI: Xiaomi Redmi Note 3 Pro can capture 3840*2160 30p. And this phone costs less than Umidigi S2.

Coporama

bencebacsi replied at 2017-12-31 18:10
Hi,
Yes, I can confirm it. The developers have been notified, so they will invetigate this case. P ...

Thanks for the answer. Thought I had something wrong. Can developers hint to make an update immediately on android 8?

samuxxxyyyzzz

bencebacsi replied at 2017-12-31 18:19
Did you try to use different SIM cards? Are you sure your SIM card is properly installed?

why the Umidigi S has Android 7 if it has the same processor Mediatek Helio P20 (MT6757) that has the Umidigi S2, even the Umidigi S is older than the Umidigi S2

Boby13bobr

\n\nyou know that normally there are rounded corners of the display? After the last update my umidigi s2 has almost no rounded corners.It started getting slow and started lagging in some games. it's still super fast but this is annoying me. My Bluetooth started turning on randomly and sometimes when i plug the charger it starts making strange sounds and says"over voltage charger detected"or something like this. It was much better with the previous update. I'm waiting for the next one.

abdullah71

we  want  them change   not  update

OliAusHannover

thx for forst update with newer Android patch level. Now it is February 2017, but this is still not the latest one. Would be great if you can add latest available patch level during next ROM update

S11ton

I wrote several questions on the first page. Are you going to answer?

1. You are right my friend! Look at the screenshot of YOUR footage properties. 13.87i means INTERLACED VIDEO! It is not PROGRESSIVE scan! That is why you see 27 fps in the windows properties and 13.87 fps in Adobe Premiere Pro. Look at your own footage, it is not smooth. It jerks from frame to frame.

2. I see visual artifacts in your footage: horizontal lines at the edges of the screen. Do you see them? I have the same on my phone.

3. I can change the ISO speed in pro-photo mode, BUT that feature doesn't work properly! When fixed ISO selected (100, 200, 400...) the camera is still changing brightnes of the picture.

4. I know for sure that every iPhone since 10 year old 4s model has ability to manually change the shutter speed using filmic pro app. Many cheap android phones can change the shutter speed in Camera FV-5.

I hope you can give us a clear answer about each of these 4 issues. And tell us what and when you can fix in the next firmware.