UMIDIGI Z Pro V7.01_20171023 Android 7.1.1 ROM - SPFT + OTA release

bencebacsi Post time 2017-11-9 13:32:06 | Show all posts   [Copy link]
216 27243
Author: bencebacsi

UMIDIGI Z Pro V7.01_20171023 Android 7.1.1 ROM - SPFT + OTA release

  [Copy link]

0

threads

10

posts

46

credits

New Member

Rank: 1

credits
46
Post time 2017-11-2 08:46:45 | Show all posts
flashed with Flashtool - works great. No recovery though
Anyone knwo how to restor stock recovery?

0

threads

23

posts

180

credits

Senior Member

Rank: 2

credits
180
Post time 2017-11-2 15:25:04 | Show all posts
vendreddy replied at 2017-11-2 08:46
flashed with Flashtool - works great. No recovery though
Anyone knwo how to restor stock recovery?

To restore stock recovery follow these steps:
  • Download last UMIDIGI ROM, the one in the first page of this thread.
  • Unzip the ROM
  • Switch off the phone and disconnect from USB port if connected
  • Start Flash Tool and press scatter-loading button; then navigate to the folder where you have unzipped the ROM and select the scatter file
  • Uncheck all lines except for the corresponding to the recovery, then press Download button and connect the phone to the USB port
  • Wait for finish message and you're done



42

threads

446

posts

1744

credits

Diamond Member

Rank: 4

credits
1744
Post time 2017-11-3 15:43:20 | Show all posts
adnan replied at 2017-10-24 16:45
Guys how have updated their devices , please share your experience after this update about ,
Touch S ...

Touch Screen = works just as well as before
Weak Signals = I have no problems with the signal strength
Camera Quality = The quality of the photos did not get better

1

threads

48

posts

386

credits

Platinum Member

Rank: 3Rank: 3

credits
386
Post time 2017-11-5 01:12:47 | Show all posts
I updated the rom after using NOA N rom as follows.
Flash tool in download mode first over NOA.
then after booting phone to check IMEI still work, Flashed again with Flash tool in firmware upgrade mode.

Have been using this update for over a week now and it's better than NOA10 N rom for me.
I'm on 3uk and with NOA rom I could not use 4G/LTE only mode from engineers menu. Only 4G data would work, could not call anyone.
But with this rom I can use 4G only mode and call too, It's not perfect as calls do suddenly disconnect sometimes, but I can live with that.
This rom has same battery drain as NOA did, it's better than before.
The NOA N rom camera is not as good as the M rom also.
I feel for me that the camera is better, Before on all the other N roms I  tried, the greens sometimes came out blue, and when you held the camera pointed at something in bright sunlight, like shooting grass you could see the pixels changing colour in patches all the time as it was sort of not computing correctly or something. But looks ok now, not so aggressive colours.
WIFI seems patchy, as I'm scrolling though facebook is kind of takes a while to catch up downloading next feed. Maybe the app as don't have many other problems with connection in other apps. it can scroll though a lot of feeds sometimes and most times only 3 to 5 then buffers.
with a speedtest.net test I constantly get over 100Mb so seems fast enough.
I don't have any real issues with touch screen, I use it in 480DPI too.
So far it's stable and the NOA rom is no better than this for me. so sticking with this one now as works better for me using 4G.
I believe the camera won't get any better, it's the lens or maybe the Mediatek chips that don't handle the graphics correctly or something. On one of the roms when using Gallery, when sliding the photo along to next or previous you could see the picture was focused sharper the millisecond it was in view and suddenly would be less sharp.(something to do with the gallery app maybe, It don't do it in this rom) I also have tried taking a screen shot to take a photo instead to see if that makes any difference, but when looking at it you still don't get sharp as it looks though the viewfinder/screen as you are looking at it. funny how the photo looks clear while looking at the object you are shooting on the screen looks good clear focused, then find the result is not quite as focused or detailed as it looked. In well lit conditions you can get some really nice photos though.
Well that's my opinion any way.
Thinking of getting the S2 Pro but it's looking like the camera is going to be worse in that unless they are going to use a better one, hoping that's what is going to be announced on Monday. or maybe it's going to be NFC. both I hope.

7

threads

105

posts

908

credits

Diamond Member

Rank: 4

credits
908
Post time 2017-11-8 08:29:30 | Show all posts
After a clean flash of the ROM I lost factory recovery. Downloaded the ROM again in case it was corrupted and followed the instructions for restoring Recovery but it still shows the lying down android with No Command. Retried a complete rewrite in Download and Update modes, still missing Recovery. Never happened to me before, am I missing something?

7

threads

105

posts

908

credits

Diamond Member

Rank: 4

credits
908
Post time 2017-11-8 09:13:15 | Show all posts
Aaaaaaarrrrrrggggh!!! My bad, I found this hint in the forums. "At the dead Android, hold POWER button, then tap volume UP to get to the recovery menu." Thanks Chooks06
 Author| Post time 2017-11-8 09:21:55 | Show all posts
Terry99 replied at 2017-11-8 09:13
Aaaaaaarrrrrrggggh!!! My bad, I found this hint in the forums. "At the dead Android, hold POWER butt ...

Actually that would've been enough to just read the tutorial in the first post about manual OTA update - optional method.
''
...
  • Your phone reboots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
...
''

3

threads

29

posts

112

credits

Senior Member

Rank: 2

credits
112
Post time 2017-11-8 12:16:41 | Show all posts
By some weird reason I can't calibrate my compass.
In engennering I got the message "MSENSOR DATA IS NOT GOOD".Easy to recalibrate on 6.0 by an "8 shaped" movement...

1

threads

65

posts

275

credits

Platinum Member

Rank: 3Rank: 3

credits
275
Post time 2017-11-9 03:37:43 | Show all posts
Hi!

Yesterday has arrived my Umidigi Z Pro with Android 6. I'm afraid upgrade to stock Umidigi android 7, because I read so many bad things in this connection of this ROM.  My phone is very very good working  with Android 6, but the camera pictures is not to good   So many noise and not too sharp pictures. I tryed 4-5 another camera programs, but  was nothing changes.
My probelm with this phone only the camera. Anyything else is very good. WiFi,4G, GPS : everything what i use!
So my question : the pictures are better with this NOA ROM? Or with the Gemini ROM? And anything else problem? If possible somebody show to me some picture which made with NOA?
I'm interested in all the experience because if everythings are good, I'll replace the rom!

Thank You Very much!


 Author| Post time 2017-11-9 13:32:06 | Show all posts
doiiido replied at 2017-11-8 12:16
By some weird reason I can't calibrate my compass.
In engennering I got the message "MSENSOR DATA IS ...

Try to calibrate it in Factory Test mode. Dial *#*#33#*#* then choose single test.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list