UMIDIGI C2 V1.6_20171019 ROM - QGDP + SPFT release

bencebacsi Post time 2017-12-5 19:02:52 | Show all posts [Copy link]
77 14724
Author: bencebacsi

UMIDIGI C2 V1.6_20171019 ROM - QGDP + SPFT release

[Copy link]

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2017-11-23 00:58:14 | Show all posts
Случилась беда... телефон стал кирпичем... причем я всего лишь заливал на него сериал...
при прошивке через SP_Flash_Tool ошибка при форматировании...(0xC0050009)

при прошивке через QGDP_Assembly:
20:11:05 CELL0: V3.1.8.0
20:11:05 CELL0: Cell 0 USB address is: com3
20:11:05 CELL0: Start Assembly firmware upgrade.....
20:11:05 CELL0: Download Started...
20:11:05 CELL0: Downloading CPB:
20:11:05 CELL0: Init Connect Arg.
20:11:05 CELL0: Downlaod DA Start.
20:11:07 CELL0: Downlaod DA Success.
20:11:07 CELL0: Dut has been efused, sbc!
20:11:08 CELL0: the device info uploade server Successs in first time
20:11:08 CELL0: Get Usb Status Success.
20:11:10 CELL0: Download signed image, do write efuse!
20:11:11 CELL0: Write Efuse By DA.
20:11:11 CELL0: WriteEfuse OK!
20:11:11 CELL0: Check if the partition has changed......
20:11:11 CELL0: Format Device Partition Start...
20:13:11 CELL0: Format Device Failed.
20:13:11 CELL0: ERROR:-1073414135
20:15:12 CELL0: DisConnect the device
20:15:17 CELL0: Total download time elapsed: 4 min : 12 sec
20:15:17 CELL0: Downloading CPB: Failed!

Может кто знает как решить проблему?
(все началось из за wifi... не работал интернет по wifi пока не перезагрузишь телефон... потом при скачивании телефон вообще вырубился и больше не включается...)

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2017-11-23 01:00:38 | Show all posts
тест памяти проходит на ok

0

threads

3

posts

30

credits

New Member

Rank: 1

credits
30
Post time 2017-11-23 13:53:06 | Show all posts
Похоже флэш умер.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2017-11-24 21:46:24 | Show all posts

Hi there.
I had some problems in UMIDIGI_C2_V1.6_20171019.

1.
Settings>Intelligent Assistant>Keys
Keys style ENTITY KEYS
Swap back key and menu key = enable

A C2 forget this setting when reboot. (but A indicator keeps “enable”)

2.
Google Play shows some system apps to updateable list.
And update automatically. After that, A C2 be unstable and I cannot uninstall update.

At least these apps.
-Power Master
-TouchPal 2017
-360 clone

Might be conflict with Google Play and UMIDIGI APP Store or permisssion problem.

Is working properly?

P.S.
A C2 is good hardware specs but software packaging is weak.
qiku apps (ex. music player, launcher3)has PHONE, LOCATION, CONTACTS permission. Is it need? is this secure?
I want a Pure Android OS.  At least will be able to install the other Launcher apps?


0

threads

4

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2017-11-25 03:34:57 | Show all posts
I also want a pure Android OS. I bought the Umidigi c2, but it is not my property. I can not change the OS and can not even root it. Never again will I buy a Umidigi, even if the hardware is still so good. As good as it gets, the GPS is awful.

0

threads

4

posts

38

credits

New Member

Rank: 1

credits
38
Post time 2017-11-26 23:17:36 | Show all posts
Cleaned stock.

attention, this instruction was not tested by the manufacturer, therefore the author does not bear responsibility for possible damage
https://cloud.mail.ru/public/JoW3/vyd2CPcgc


Removed:360Security, Dcshare, Touchpal2017, Quicktouch, Black magic, Personal assistetnt screen abroad, Umi APP STORE, 9Apps, News republic, UCbrowser, Avatarmaster, Umicloudsync, Safety Space, 360clone, initiator.
Installation:
1.umi os 7.0.0.42
2. Sp flash tool 5.1744
3.system.img and scatter in one folder.
4. In spft open scatter,
5.put tick on system.img, attention" download only"attention mode, START
6. If battery > 30%, then connect switched off phone.
7. wait for a green tick
8.PROFIT

A source https://4pda.ru/forum/index.php? ... post&p=67214188

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2017-12-3 21:28:51 | Show all posts
Hi Guys,

Just received the phone and love it.
Only thing that is missing is an UVC driver for an usb camera. Could this be added please?

Tx in advance.

0

threads

12

posts

42

credits

New Member

Rank: 1

credits
42
Post time 2017-12-5 16:01:34 | Show all posts
Dear all,

On the post of the Z1 pro (UMI OS) see the link:#30
You say it's possible to root the phone whit magisk.

Can you say if it's possible on the C2 and how we can do (whiteout twrp)

Thank you for your support.

0

threads

22

posts

124

credits

Senior Member

Rank: 2

credits
124
Post time 2017-12-5 18:36:13 | Show all posts
priska37 replied at 2017-12-5 16:01
Dear all,

On the post of the Z1 pro (UMI OS) see the link:#30

Hi guys. There is not any way to unlock bootloader?  To write to UMI maybe?
Thanks

0

threads

22

posts

124

credits

Senior Member

Rank: 2

credits
124
Post time 2017-12-5 19:02:52 | Show all posts
Edited by guideman at 2017-12-7 19:02 \n\n
stavd92 replied at 2017-11-26 23:17
Cleaned stock.

attention, this instruction was not tested by the manufacturer, therefore the autho ...

Hi
Is it possible this way to install and use a custom launcher as primary?
Thanks
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list