UMIDIGI Crystal V1.0_20171019 NEW ROM - SPFT + OTA release

bencebacsi

This is the SP Flash Tool + OTA release of the

V1.0_20171019 system software

for UMIDIGI Crystal 2GB

This ROM is only for the 2GB version with MT6737T SoC and new screen hardware. The screen still can work on older devices but with lower quality.

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

UMIDIGI Crystal receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

Changelog:

• Minor bug fixes
  

--------------------------------------------------------------------------------

SP Flash Tool

Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

ROM: >>>>> full_wtk6737t_66_n-user_NEW_20171019.rar <<<<<

Extract the .rar file before use. The scatter file (MT6737T_Android_scatter.txt) is inside the extracted folder, together with the other components

SPFT: SP_Flash_Tool_v5.1728.rar

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI Crystal if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMIDIGI Crystal to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------

OTA (recovery) update

Manual (local) OTA update method instructions

• Copy the downloaded .zip file to either the internal memory or the SD card of your phone
• Go to Settings --> About phone --> Wireless update
• Tap the 3-dot menu button at the top right corner and select Local updates
• Brows for the ...update.zip file and select it
• Tap Install now, comfirm the process with OK and wait until the process will be finished
  

Update file for manual OTA update: >>>>> UMIDIGI_Crystal_NEW_V1.0_20171019_mt6737t_update.zip <<<<< It can update version 170925 only

WARNING! If your device is rooted, first you have to unroot it before performing an OTA update or the update process will fail!

Optional method (in case if the manual OTA update gets stuck): Install from recovery

You need a microSD card (with at least 4GB capacity) installed in your phone!

• Copy the ...update.zip file to your SD card
• Press and hold the volume-up and power buttons together until your phone restarts in recovery mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
• Here you can see a lying android figure with an exclamation mark in red triangle on its tummy and ''No command''.
• Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
• Move to ‘Apply update from SD card’ and select it.
• On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
• After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
• Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'
  

Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones

theglen35

Hello , after i flashed rom imei numbers gone but i fixed it with SN writer and now no matter what rom i flash on the phone i get no service from sims when the phone goes to sleep and it takes a while to get service when i wake the phone.

bencebacsi

theglen35 replied at 2017-11-10 00:15
Hello , after i flashed rom imei numbers gone but i fixed it with SN writer and now no matter what r ...

Hi,
Do you remember which one was your original version and which one was the first you flashed on it?

theglen35

\n\n

bencebacsi replied at 2017-11-10 14:07
Hi,
Do you remember which one was your original version and which one was the first you flashed on ...

Hello the phone came with this rom 20170811 and i flashed this rom 201701018
I also get sim processor error in notification

nachogc

\n\n

nachogc

nachogc replied at 2017-11-12 04:02
Edited by nachogc at 2017-11-12 05:21 \n\n Edited by nachogc at 2017-11-12 05:20 \n\nI have updated ...

Sorry. I have posted this bug in the wrong thread.

bencebacsi

theglen35 replied at 2017-11-10 20:01
Edited by theglen35 at 2017-11-10 20:07 \n\n
Hello the phone came with this rom 20170811 and i flas ...

You should install the V1.0_20171026 version, this one here is not for your phone. Also, did you try to use different SIM cards?

theglen35

bencebacsi replied at 2017-11-12 11:34
You should install the V1.0_20171026 version, this one here is not for your phone. Also, did you  ...

Yes i tried other sim cards. Can you send me the NVRAM.bin file for the phone please.

bencebacsi

theglen35 replied at 2017-11-12 20:04
Yes i tried other sim cards. Can you send me the NVRAM.bin file for the phone please.

Your issue is not related to the nvram and anyway if that's damaged, you can fix it with SN Writer Tool. It can be the result of a physical contact error between the pins of the SIM slot and your SIM card. Can you anyway use your SIM card, connect to your network and access the phone numbers stored on it?

theglen35

bencebacsi replied at 2017-11-13 10:04
Your issue is not related to the nvram and anyway if that's damaged, you can fix it with SN Writer ...

The sim card works but when the phone goes to sleep or standby it looses sim service, no signal but it returns sometimes and then no service again.