UMIDIGI C NOTE 2 V1.7_20170830 ROM - QGDP + SPFT release

bencebacsi

This is the QGDP + SP Flash Tool release of the

V1.7_20170830 (UMI OS 2.0) system software

for UMIDIGI C NOTE 2

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

UMIDIGI C NOTE 2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

Changelog:

• OTA upgrade crash problem fixed
• DR problem to detect threats fixed
• The layout of the startup wizard optimized
• Optimized Russian translation
  

--------------------------------------------------------------------------------

QGDP (official tool for flashing)

Resources:

QGDP Flashtool tutorial: http://community.umidigi.com/thread-15897-1-1.html

ROM:

>>>>> UMIDIGI_CNOTE2_7.0.029.P1.1708301709.5501L.VZ_YM_5501L_OE.NOEFUSE.CPB.rar <<<<<

Extract the .rar file before use.

QGDP flasher: QGDP_Assembly_V3.1.8.0614._portable.rar The password when running the tool: ase

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

--------------------------------------------------------------------------------

SP Flash Tool (unofficial tool for flashing)

Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

ROM:

>>>>> mt6750n_p383_5501l-360btl_91umi_cc-360_512gbitp32d3_n0_lte_3m-fdd-cs_mul_qphone_20170830.rar <<<<<

DB files included

Extract the .rar file before use. The scatter file (MT6750_Android_scatter.txt) is inside the extracted folder, together with the other components

SPFT: SP_Flash_Tool_v5.1728.rar

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI C NOTE 2 if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMIDIGI C NOTE 2 to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.

mehdi1986

my new umidigi c note 2 have a probleme withe facebook ots dosnt open after 4 minute or more and when open facebook it come a msg that ask you to close facebook . i have also the problem of notification of the gemail it dosnt coms i have to chek into the apps all the time to see news
the link of youtube prouve
https://www.youtube.com/watch?v=C07vrlP4hvQ&t=5s

Zippi

\n\nI have this last version but again there is no way to have GMail notifications.
How can i get it?
Thanx.
Zippi.

bencebacsi

Zippi replied at 2017-9-7 21:06
Edited by Zippi at 2017-9-7 21:08 \n\nI have this last version but again there is no way to have GM ...

Hi,
1. Go to Settings --> Permission Management
2. Choose App startup management
3. Tap the 3-dot button in the top right corner, select 'System auto startup app(s)', then Confirm
4. Scroll down to 'Gmail' and make it enabled.
Now you can sync your Gmail (so get notifications as well) but it is recommended to check your sync status in Settings --> Accounts --> Google.
You may enable all other google services or anything you want.

winoitaly

what is the password for QGDP_Assembly_V3.1.8._portable ?

z7ykLon

ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)

This for a bricked C Note 2 by OTA when trying to flash by SPFT in this post.

z7ykLon

\n\nQGDP does not scan port.It still looping connect and re-connect.

Бо

z7ykLon replied at 2017-9-8 16:59
Edited by z7ykLon at 2017-9-8 17:02 \n\nQGDP does not scan port.It still looping connect and re-con ...

Hi, you need to install right driver for you computer.
Driver for  win xp, win7, win8 : https://yadi.sk/d/kvb0_wT93MSXRc
Driver for win 10: https://yadi.sk/d/SYwSC0jl3MJyj6

AlejandroOS

winoitaly replied at 2017-9-8 15:59
what is the password for QGDP_Assembly_V3.1.8._portable ?

Hi friend.. The passwor is: ase
Have a good day

sinail

Hello, always the notification problem that does not work + impossible to change the luncher

Daguru

I need firmware which fixes my wlan problem range unter 5 meter please help