UMIDIGI Z1 Pro V1.1_20170804 ROM - SPFT + OTA release

bencebacsi Post time 2017-8-13 18:18:01 | Show all posts [Copy link]
144 12473
Author: bencebacsi

UMIDIGI Z1 Pro V1.1_20170804 ROM - SPFT + OTA release

[Copy link]

3

threads

27

posts

138

credits

Senior Member

Rank: 2

credits
138
Post time 2017-8-12 21:58:43 | Show all posts
bencebacsi replied at 2017-8-12 04:24
I'm afraid it's a quality issue, not a defection, so it depends on your seller's return/exchange p ...

Hello Admin, I would like if you could please
respond to me. Is there any reason to as why when I have my brightness low the blacks have a reddish tint to them which is very noticeable. When the brightness is higher I don't notice it. It's very confusing and if you could help me out I would be very grateful. I can provide pictures if you wish.
Thanks in advance,
Aidan.

 Author| Post time 2017-8-13 10:16:20 | Show all posts
Oye replied at 2017-8-12 17:53
This update bricked my Umidigi Z1 Pro, yet again. I flashed it back, but now lost signal on sim 2  ...

If your SD card is error free or you don't have an SD card (since you have 2 SIMs installed) and you don't interrupt the updating process, it cannot brick your phone.
Please check (dial *#06#) whether you still have your original IMEI numbers or only 1 and 2 digits.
 Author| Post time 2017-8-13 10:42:25 | Show all posts
KillerGamingBro replied at 2017-8-12 21:58
Hello Admin, I would like if you could please
respond to me. Is there any reason to as why when I ...

Hi,
Go to Settings --> Display --> MiraVision , then click the 3-line button in the top left corner, and Restore default settings in the bottom of the menu list.
Test your phone again. If nothing changes, please share at least one close photo showing your issue.

2

threads

58

posts

240

credits

Platinum Member

Rank: 3Rank: 3

credits
240
Post time 2017-8-13 11:48:00 | Show all posts
bencebacsi replied at 2017-8-13 10:16
If your SD card is error free or you don't have an SD card (since you have 2 SIMs installed) and y ...

Hi, I did not interrupt the update process at all. I presently have 3 umidigi devices.

C Note (never bricked after OTA)
G (Never bricked after OTA)
Z1 PRO... (Bricked twice after OTA)
Screenshot_20170813-044359.png

2

threads

58

posts

240

credits

Platinum Member

Rank: 3Rank: 3

credits
240
Post time 2017-8-13 11:50:09 | Show all posts
bencebacsi replied at 2017-8-13 10:16
If your SD card is error free or you don't have an SD card (since you have 2 SIMs installed) and y ...

Signal 2 is non existent & Signal one is now very poor.
Thank you for responding. How do I resolve this 1111111 & 2222222 number? I still have my original box with numbers on.
 Author| Post time 2017-8-13 12:26:16 | Show all posts
Oye replied at 2017-8-13 11:50
Signal 2 is non existent & Signal one is now very poor.
Thank you for responding. How do I resolv ...

Maybe your cache partition was near fully loaded and that caused an unexpected error. Unfortunately I cannot test every possible condition. You can recover your orriginal IMEI numbers with the SN Writer Tool.

2

threads

58

posts

240

credits

Platinum Member

Rank: 3Rank: 3

credits
240
Post time 2017-8-13 13:35:08 | Show all posts
bencebacsi replied at 2017-8-13 12:26
Maybe your cache partition was near fully loaded and that caused an unexpected error. Unfortunately ...

Would attempt this recovery process and update.
Thank you

2

threads

58

posts

240

credits

Platinum Member

Rank: 3Rank: 3

credits
240
Post time 2017-8-13 16:37:15 | Show all posts
Edited by Oye at 2017-8-13 16:40 \n\n
bencebacsi replied at 2017-8-13 12:26
Maybe your cache partition was near fully loaded and that caused an unexpected error. Unfortunately ...

I keep getting this error message. Any other way to change this imei number?
sn pix.png

2

threads

58

posts

240

credits

Platinum Member

Rank: 3Rank: 3

credits
240
Post time 2017-8-13 16:38:33 | Show all posts
Edited by Oye at 2017-8-13 16:42 \n\n
bencebacsi replied at 2017-8-13 12:26
Maybe your cache partition was near fully loaded and that caused an unexpected error. Unfortunately ...

Repost edited ......

3

threads

27

posts

138

credits

Senior Member

Rank: 2

credits
138
Post time 2017-8-13 18:18:01 | Show all posts
bencebacsi replied at 2017-8-13 10:42
Hi,
Go to Settings --> Display --> MiraVision , then click the 3-line button in the top left corne ...

It may be hard to see, but if you turn your brightness up you can definitely see the red. Keep in mind it was supposedly displaying complete black. It is much more noticeable with the human eye.
41_1502619132415.jpeg
40_1502619136141.jpeg
Screenshot 2017-08-13 at 8.15.50 PM.png
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list