1. Format the whole flash chip without the bootloader with SP Flash Tool. You will lose your IMEI numbers but you can find them on the back of the packing box of your phone.
2. Flash the correct ROM on your phone.
3. Recover your original IMEI numbers with SN Writer Tool.
Maybe the screen brightness is set to a too low level but the eyebrow mode cannot brick your phone. Try to go to a well lit place and force your phone to reboot by pressing the power button for 10 seconds. Then set a higher brightness level.
cyril replied at 2017-8-11 20:23
Hello, thank you for your answer. Do you think I can make the warranty work for an exchange if the ...
I'm afraid it's a quality issue, not a defection, so it depends on your seller's return/exchange policy whether they're willing to replace that device or not. Basically it's not a warranty issue.
Hello Admin, I would like if you could please
respond to me. Is there any reason to as why when I have my brightness low the blacks have a reddish tint to them which is very noticeable. When the brightness is higher I don't notice it. It's very confusing and if you could help me out I would be very grateful. I can provide pictures if you wish.
Thanks in advance,
Aidan.
Oye replied at 2017-8-12 17:53
This update bricked my Umidigi Z1 Pro, yet again. I flashed it back, but now lost signal on sim 2 ...
If your SD card is error free or you don't have an SD card (since you have 2 SIMs installed) and you don't interrupt the updating process, it cannot brick your phone.
Please check (dial *#06#) whether you still have your original IMEI numbers or only 1 and 2 digits.
Hi,
Go to Settings --> Display --> MiraVision , then click the 3-line button in the top left corner, and Restore default settings in the bottom of the menu list.
Test your phone again. If nothing changes, please share at least one close photo showing your issue.
[Copy link]
Peep Card
Radar card
Post time 2017-8-11 15:09:27
thanks for nothing umi
Magic mirror
Author
