eMAX mini Unbrick Kit + TWRP recovery + Root

fabi_92

bencebacsi replied at 2015-11-2 09:42
You should press all the three buttons together to get into qdloader mode. Maybe almi can help you  ...

i follow this guide:

Extract QPST-2.7.399.rar and run SETUP.EXE
Run SETUP.EXE. press install when it prompt to install additional Visual C++ runtime libraries. Follow the defaults, press NEXT until it finish the installation.
Connect Deadboot Flare(s100) to Computer / Laptop.
Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. if the item is there, you are done with the driver install.
If there is no item under PORTS(COM &LPT), check device manager under “Other Device>Unknown Device”.
Double Click “Unknown Device > Update Driver > Browse My Computer” Browse to the where you saved extracted Jellybean / ICS Drivers. It will install the driver, if it prompts for unsigned drivers, press “Install Anyway”.
It should be now listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.

but i've a serious problem: device not recognize. i don't find qualcomm Qloader and also uknown device. I do not know how to install the drivers. I try desperately since a days.

fabi_92

sorry for the double post.
i understand what you mean: download mode + long press VOL UP
good bro

now, i will try the flash.
thanks

almi

Although the phone is now unbricked, I've lost the boot logo and now only have the linux penguin. My sim slots have no imei numbers so the phone is unable to connect to services ( no dialling or data ).

Kinda defeats the purpose of a resbue kit

fabi_92

\n\nsolve everything. thanks I have not tried the IMEI yet

edit: IMEI uknown and pinguin logo also for me..

on cyanogen i don't find even the vibration to the keys.

bencebacsi

Did you try to flash the stock ROM as a system update or with twrp?
Here's a Guide for IMEI change. Maybe that can work, but first go back to the stock ROM.

almi

How do I flash the stock rom? TWRP fails during flashing.

fabi_92

bencebacsi replied at 2015-11-2 21:23
Did you try to flash the stock ROM as a system update or with twrp?
Here's a Guide for IMEI change.  ...

I used emergency kit ->  twrp -> flash cm 12.1

almi

\n\nSame here, get the same error.

bencebacsi

Another Guide that can help you to put your phone into Diagnostics mode. I don't have a such phone, so I can't figure out the whole process.
The stock ROM here is an OTA update format, so you should try to install it as a system update from Settings/About phone/System updates

fabi_92

well, I'm ruined.
I wanted to try again to return to the emergency kit stock.
Now, is dead. the buttons are not working.
no bootloader, no driver, no download mod, no recovery .... NOTHING !!!
only a white LED when i charge.

damn this device is driving me to despair.
I could contact umi somehow?