UMi S1

bencebacsi Post time 2017-7-29 04:34:23 | Show all posts |Read mode  Close [Copy link]
0 1862
View: 1862|Reply: 0

UMi S1

 Close [Copy link]
Post time 2017-7-29 04:34:23 | Show all posts |Read mode
This is the SP Flash Tool release of the
20130527 system software
for UMi S1

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

SP Flash Tool

Extract the .rar file before use. The scatter file (MT6589_Android_emmc_scatter.txt) is inside the extracted folder, together with the other components

VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.

Here's an optional solution to start the flashing process on your UMi S1 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMi S1 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list