G

bencebacsi

This is the SP Flash Tool release of the

V1.8_20170727 firmware

for UMIDIGI G

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

UMIDIGI G receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

Changelog:

• Available video record quality settings change to "high", "medium", "low", etc.
• Settings - "projection" in the voice menu removed
  

--------------------------------------------------------------------------------

SP Flash Tool

Resources:

.

SPFT tutorial: http://bit.ly/SPFTguide

ROM: >>>>> UMIDIGI_G.V1.8_20170727.rar <<<<<

Extract the .rar file before use. The scatter file (MT6737M_Android_scatter.txt) is inside the extracted folder, together with the other components

SPFT: SP_Flash_Tool_v5.1752.rar

VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.

Here's an optional solution to start the flashing process on your UMIDIGI G if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMIDIGI G to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.

HCBaco

bencebacsi replied at 2018-1-11 03:19
If you haven't done it yet, please flash the latest ROM with SP Flash tool in firmware upgrade mod ...

Unfortulately this isn't the solution for the Wifi problem
Did the firmware upgrade with the SP Flash tool to Rom V1.8;   this version was already active.
Within 2 hours the Wifi internet connection is lost again and can only be activated by rebooting the phone.....
Any other ideas ?   Is it possible to try flashing to Rom V1.6 ??

bencebacsi

andrew89 replied at 2018-2-13 06:23
hi guys... how we can root umidigi g? i try kingoroot, kingroot, iroot, rootgenius .... but nothing. ...

Hi,
Magisk Manager with the stock boot.img (same version you have installed on your phone) and SP Flash Tool should work. Read the installation instructions (''Via Magisk Manager'') on the page.

teacher77

Will Umidigi release new firmware updates for Umidigi G?
The last one was released six months ago...

pl_macko

Hi, when uploading software, wedge remove everything. I lost the numer IMEI. Please Help Me.
Witam, podczas wgrywania oprogramowania, kliknąłem usuń wszystko. Straciłem numer IMEI. Proszę o pomoc. Może MarcinP pomoże?

MarcinP

pl_macko replied at 2017-8-1 03:17
Hi, when uploading software, wedge remove everything. I lost the numer IMEI. Please Help Me.
Witam,  ...

Pomoże.
Niestety ale wszystko z formatowales.
Teraz musisz użyć SPFT i najlepiej użyć firmware upgrade.
Tutaj masz instrukcje do SPFT
http://community.umidigi.com/thread-11-1-1.html
a tutaj system
http://community.umidigi.com/forum-154-1.html
Po wszystkim musisz użyć SN writer
http://community.umidigi.com/thread-1375-1-1.html
Możesz spisać IMEI z pudełka lub nalepek które były na telefonie.

palec

Hi,

will you release UMI OS also for this model?

bencebacsi

palec replied at 2017-8-3 02:51
Hi,

will you release UMI OS also for this model?

Hi,
I'm sorry but no, UMI OS won't be released for this model.

pl_macko

Thank You :-)
Dzięki Marcin, pomogło :-)

Nek87

Hi,
I can do screencast to a TV with umidigi g?

bencebacsi

Nek87 replied at 2017-8-25 17:27
Hi,
I can do screencast to a TV with umidigi g?

Hi,
Check it in Settings --> Display --> Cast.

Nek87

\n\n

bencebacsi replied at 2017-8-26 07:27
Hi,
Check it in Settings --> Display --> Cast.

In version 1.8, I see that the cast option disappeared from the settings. In 1.6 appeared.

Smartik

Hi! Front camera don't working after update. How to solve this problem? (sorry, my English bad)