Repair IMEI with SN Writer (for almost all UMI(DIGI) phones)

bencebacsi Post time 2016-12-2 17:19:54 | Show all posts   [Copy link]
177 95527
Author: bencebacsi

Repair IMEI with SN Writer (for almost all UMI(DIGI) phones)

  [Copy link]

3

threads

46

posts

194

credits

Senior Member

Rank: 2

credits
194
Post time 2016-10-5 07:01:18 | Show all posts
Azuraël replied at 2016-9-29 04:31
Hi,
I had a problem with IMEI numbers and they were replaced by 1111111... etc  and 2222222.... etc ...

Hi Azuraël,

I am in the same situation. IMEI numbers are 11111111... and 22222222... on my UMI Super (after flash certainly). I've done what's describe in this tutorial and all is OK now.

At the begining, when I plug my phone the process was stuck and ... i just press volume up button to unlock flashing process

That's MAGIC...

NB : what i've done is write in the tutorial

10.  Connect your (powered off) phone to USB. - You need or don't need to press any button while connecting, depending on your model. Only one configuration will work! You have to apply the same method that's needed for SP Falsh Tool as well.
The writing process will start automatically while your phone is switching into META mode.


@bencebacsi : very, very good job

1

threads

5

posts

46

credits

New Member

Rank: 1

credits
46
Post time 2016-10-6 03:47:18 | Show all posts
help! with the last upgrade the imei numbers of my umi super was erased, im very very new in this, and i get stuck in step 9, how can i connect in the right way the cell pone to the pc? and the files in the guide Works with the last software of my umi super? please help

1

threads

5

posts

46

credits

New Member

Rank: 1

credits
46
Post time 2016-10-6 03:56:23 | Show all posts
how can i put the umi super in meta mode? :/
 Author| Post time 2016-10-6 07:45:43 | Show all posts
Zomvegan replied at 2016-10-6 03:56
how can i put the umi super in meta mode? :/

Just connect your phone to USB when it's turned off. In the writing process it will automatically switch to meta mode.

1

threads

5

posts

46

credits

New Member

Rank: 1

credits
46
Post time 2016-10-9 08:26:38 | Show all posts
sorry me again, i cant install the usb vcom drivers,:s due to a "code 10" error, and when im try to use de sn write tool ignoring that code 10 error, it shows this message :smartphonesn: connectwithpreloader: get dynamicpreloader comport time out, how can i install the drivers correctly? im trying in a windows 7 32 bit and in a windows 10 64 bits and in both cases is the same problem
 Author| Post time 2016-10-9 10:43:01 | Show all posts
Zomvegan replied at 2016-10-9 08:26
sorry me again, i cant install the usb vcom drivers,:s due to a "code 10" error, and when im try to  ...

You mustn't ignore the proper driver installation. Maybe I shouldn't mention but extract the MT65x3 USB VCOM drivers.zip file before using its content. Forget about the 32-bit Win7 and try in the 64-bit Win10. Instal the drivers by running the InstallDriver.exe file. If you're still unsuccessful, open your Windows device manager, connect your powered off phone to USB (don't press any button of it) and if you see an unknown device to pop up, immediately right click on it and update its drivers manually. You can brows fro the drivers folder and Windows will find the proper drivers in it.

6

threads

52

posts

723

credits

Diamond Member

Rank: 4

credits
723
Post time 2016-10-12 05:05:41 | Show all posts
when i used SN_Writer_Tool_v1.1632.00 i will get error INCONSISTENT
when i used SN_Write_Tool_v2.1504.00 i will get error META_WAIT_FOR _TARGET_READY_TIMEOUT

1

threads

21

posts

100

credits

Senior Member

Rank: 2

credits
100
Post time 2016-12-2 08:18:29 | Show all posts
Someone changed IMEI UMI Super? 'm Trying all ways and do not manage to.
 Author| Post time 2016-12-2 10:14:02 | Show all posts
brodzik_19 replied at 2016-12-2 08:18
Someone changed IMEI UMI Super? 'm Trying all ways and do not manage to.

Hi,

Yes, it was multiple times tested on UMi Super. Please read the instructions carefully. When you connected your phone to USB, after the first movement of the red progress bar you have to disconnect and quickly reconnect it.

1

threads

21

posts

100

credits

Senior Member

Rank: 2

credits
100
Post time 2016-12-2 17:19:54 | Show all posts
Edited by brodzik_19 at 2016-12-2 18:44 \n\nI'm doing everything the same as the SP flash, and everything Ends not successful. Try several times as you say. It appears to mistake the point. 10 guidance. Is there another form of the introduction of the Super NAME? Is this the only one?
PS.
bb. And I request you to move about my problem GSM in another topic when writing Android 7.Thank you in advance.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list