Repair IMEI with SN Writer (for almost all UMI(DIGI) phones)

lokki303

\n\nI try repair IMEI UMI Super but it failed with msg: "META_WAIT_FOR _TARGET_READY_TIMEOUT" How to fix it?

lokki303

I dial *#4634# and nothing happend

bencebacsi

lokki303 replied at 2016-6-18 17:36
Edited by lokki303 at 2016-6-18 18:28 \n\nI try repair IMEI UMI Super but it failed with msg: "META ...

After your phone switched into META mode (refer to step 10), you might need to disconnect and after a few seconds reconnect the USB cable. If the process doesn't continue or you get the final error message again, check your Windows device manager if you got a new and working serial port instead of the previous preloader COM port.

AHZ

in ROM we want to repair IMEI no BPLG file. I looked at two different ROM a. I downloaded. 20160616 and 20160708. no BPLG site is not in the file. It has started a file with MDDB.

AHZ

I get an error. failed.

Rometheus

Really nice thread, I suggest using ver. 15.52, that worked the best for me. Cheers to everyone else trying to get theirs work!

Azuraël

Hi,
I had a problem with IMEI numbers and they were replaced by 1111111... etc  and 2222222.... etc (Umi Super).
I tried so many ways...  But everytime I try, I'm stuck at one step :  There is no BPLGUI file for the Super's processor available on the Internet...   What should I do ?

bencebacsi

Azuraël replied at 2016-9-29 04:31
Hi,
I had a problem with IMEI numbers and they were replaced by 1111111... etc  and 2222222.... etc ...

Hi,

I really suggest you to just follow the instructions of this thread. All ROM packages downloadable here contains the needed modem database files.

off41

Azuraël replied at 2016-9-29 04:31
Hi,
I had a problem with IMEI numbers and they were replaced by 1111111... etc  and 2222222.... etc ...

Hi Azuraël,

I am in the same situation. IMEI numbers are 11111111... and 22222222... on my UMI Super (after flash certainly). I've done what's describe in this tutorial and all is OK now.

At the begining, when I plug my phone the process was stuck and ... i just press volume up button to unlock flashing process

That's MAGIC...

NB : what i've done is write in the tutorial

10.  Connect your (powered off) phone to USB. - You need or don't need to press any button while connecting, depending on your model. Only one configuration will work! You have to apply the same method that's needed for SP Falsh Tool as well.
The writing process will start automatically while your phone is switching into META mode.


@bencebacsi : very, very good job

Zomvegan

help! with the last upgrade the imei numbers of my umi super was erased, im very very new in this, and i get stuck in step 9, how can i connect in the right way the cell pone to the pc? and the files in the guide Works with the last software of my umi super? please help