[Closed Cyanogen Port Thread.] Looking for help with the Umi eMax!

J.Naw

\n\n

ec8or replied at 2015-10-12 11:44
I remember reading it was just for MT65xx based SoC. Check twice, double check twice. Don't brick yo ...

Oh shoot you are right.. I mixed up the 7 and the 5. >.< Well, I've got some more time to figure this out cause I just blew my installation for Cygwin... Looks like I may have to fire up the ol' Linux machine.

Edit: Well.. What do you know.. I mistakenly installed the 32bit over the 64bit cygwin.. (since I needed the clear package.. I'm too tired to understand what I am doing atm) and now all the cyanogen repo's are gone.. Looks like i'm building purely on Linux..

J.Naw

\n\n-snip- slow internet

ec8or

http://androidurdu.net/download- ... ad-mediatek-phones/
Check this pls.

J.Naw

\n\n

ec8or replied at 2015-10-12 12:02
http://androidurdu.net/download-mtk-multi-port-flash-download-mediatek-phones/
Check this pls.

Ah yes, May need incase I do screw up! Thankyou.

EDIT: I feel the kitchen should work with the MT6752.. Unless all the programs and such are hardware specific, I'll dig abit deeper..
EDIT2: Hmm, It seems like the M2M is a MT6752. But the kitchen sees it as a 6572.. This may actually work out..

ec8or

Good luck.

J.Naw

\n\nManaged to get another step ahead. I am testing the TCL M2M rom with the extracted kernel and changed mounted points in the META-INF.. Lets see if it will actually install. If not, more tinkering...

EDIT: Nope.. Just a bootloop, Maybe I didn't use the propper mount points...
EDIT2: Well shoot, Now I am unable to boot into recovery. Usually to fix this I'd do a battery pull but.. The body is a uni-body... Any ideas?

LoLaTiOn

press power 10 sec
test charging
done !

J.Naw

\n\n

LoLaTiOn replied at 2015-10-13 05:22
press power 10 sec
test charging
done !

I've done that but it keeps looping the UMI logo.. I tried to use spflashtool, which worked but now it wont boot at all.
EDIT: oooh boy.. Gotta love chinese phones -_-

LoLaTiOn

\n\n

if you stuck you have to add preloader and Formal All + Download with http://www.needrom.com/wp-conten ... 15_06_04-s7yler.zip then Formal All + Download with eMAX_2015_07_15_ROOT and add you 2 imei one by one after reboot

After finishing installation of Android s7yer, check new IMEI numbers with *#06#. You should see both IMEI numbers are 000000000000000. Now you can write new IMEI numbers to this phone.

• Dial *#*#3646633#*#* to enter Engineering Mode
• Choose Connectivity / CDS Information / Radio Information / Phone 1 choices
• Write AT +EGMR=1,7,"123456789012345" instead of AT+
• Please note that there must be a space between AT and +. You should type new IMEI number instead of 123456789012345.
• Press SEND AT COMMAND button. If you'll see AT Command is mSent message, command was sent successfully.
• Reboot and set all step when choose Phone 2.
• Write AT +EGMR=1,10,"123456789012345" instead of AT+
• Please note that there must be a space between AT and +. You should type new 2nd IMEI number instead of 123456789012345. If you don't have 2nd IMEI number, you may want to type original IMEI number of your phone.
• Restart the phone and dial *#06# and check your new IMEI numbers.
  

J.Naw

LoLaTiOn replied at 2015-10-13 05:40
Edited by LoLaTiOn at 2015-10-13 05:51 \n\n

if you stuck you have to add preloader and Formal All  ...

Okay. Thanks for the Info. I've tried it earlier with that exact rom but now the UMI logo doesn't show up. I hold the power button and absolute jack happens.. So, I'm downloading another Stock rom directly from the Forums here and i'll see if it works..