UMi Hammer

bencebacsi Post time 2017-7-11 01:53:20 | Show all posts |Read mode [Copy link]
0 1780
View: 1780|Reply: 0

UMi Hammer

[Copy link]
Post time 2017-7-11 01:53:20 | Show all posts |Read mode
This is the SP Flash Tool version of the
Stock firmware
for UMI Hammer

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
You need this tool only in case of emergency (if you've bricekd your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery.


Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

ROM: MP_mt6732_m316b_blueplus_nyx_cc_128-16_kk_lte_3m-fdd-cs_mul_sw_20150530-133115.rar - Extract the .rar file before use. The scatter file (MT6732_Android_scatter.txt) is inside the extracted folder, together with the other elements

SPFT: SP_Flash_Tool_v5.1628.rar (use this one instead of the old version linked in the UMI forum guide)

Here's an optional solution to start the flashing process on your UMI Super if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop.
1. Connect your UMI Hammer to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list