UMIDIGI C NOTE 2 V1.4_20170626 ROM - QGDP + SPFT release

bencebacsi Post time 2017-7-6 16:21:41 | Show all posts |Read mode [Copy link]
0 1925
View: 1925|Reply: 0

UMIDIGI C NOTE 2 V1.4_20170626 ROM - QGDP + SPFT release

[Copy link]
Post time 2017-7-6 16:21:41 | Show all posts |Read mode
This is the QGDP + SP Flash Tool release of the
V1.4_20170626 (UMI OS 2.0) system software
for UMIDIGI C NOTE 2

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI C NOTE 2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

WARNING!
Flashing this ROM on any other model will permanently brick your device, flashing the original ROM that fits your device will not be possible anymore!
Please make sure, double check that, you are working with a UMIDIGI C NOTE 2 smartphone before starting the flashing process with this ROM!




Changelog:
first release


--------------------------------------------------------------------------------
QGDP (official tool for flashing)
Resources:


Extract the .rar file before use.


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


--------------------------------------------------------------------------------
SP Flash Tool (unofficial tool for flashing)
Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

No DB files included
Extract the .rar file before use. The scatter file (MT6750_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI C NOTE 2 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI C NOTE 2 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list