UMI SUPER replace screen version problem

lionedizampa Post time 2017-10-7 05:03:04 | Show all posts [Copy link]
24 2178
Author: lionedizampa

UMI SUPER replace screen version problem

[Copy link]
Post time 2017-10-5 04:13:25 | Show all posts
phrvo replied at 2017-10-5 02:44
Thanks for the tip!
I can feel the click of the button being pressed OK
Unfortunately, I pushed the  ...

Vibration could be deactivated if battery is less than 15% that why you can not feel vibration when you trying switch off phone.
When you have everything set up (SPFT and PC) then press download on SPFT connect phone in to PC and if nothing happen press power button until updating process start (around 10 seconds).
Some users mentioned that they pressed and hold volume rocker while connecting to PC but I don't remember that was volume up or down. We never experienced issues with SPFT connection.
If nothing helping you need disconnect battery and flash without battery.

9

threads

359

posts

1851

credits

Diamond Member

Rank: 4

credits
1851
Post time 2017-10-5 16:49:00 | Show all posts
IMO, the real hurdle with SPFT and Windows 10 is getting the drivers installed. For me, that took me a good part of a day Googling and trying different approaches for making Windows accept them. Once that was sorted, SPFT and the flashing process worked without problem.

0

threads

97

posts

573

credits

Diamond Member

Rank: 4

credits
573
Post time 2017-10-6 01:26:23 | Show all posts
Sometimes it helped to hold volume up and press power on to start flashing... But most important is to install drivers.. If possible try to install on a windows 7 system..

2

threads

25

posts

203

credits

Platinum Member

Rank: 3Rank: 3

credits
203
Post time 2017-10-7 04:44:22 | Show all posts
Hi All,

I finally managed to flash the UMI Super with V3.02_20161121 ROM
I had to use an old Toshiba laptop (also with Win 7-64), because my HP EliteBook 8740W with tons of RAM
was definitely refusing to recognize the UMI Super...
I did NOT have to install any USB (OR OTHER) drivers for the Toshiba to recognize the UMI Super!
However, I had to disconnect the battery of the Super before I could flash, as pushing/holding the power button would not do a sIngle thing ...

It is now downlading V7.01_20170123 OTA.
We'll see if everything goes as it shoud

Thanks to all for the various tips I revceived along the tedious way.
Post time 2017-10-7 05:03:04 | Show all posts
phrvo replied at 2017-10-7 04:44
Hi All,

I finally managed to flash the UMI Super with V3.02_20161121 ROM

Please use latest firmware as charging and other stuff is improved.
http://community.umidigi.com/forum-134-1.html
123
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list