UMIDIGI G V1.6_20170520 ROM - SPFT release

bencebacsi

This is the SP Flash Tool release of the

V1.6_20170520 firmware

for UMIDIGI G

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

UMIDIGI G receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

Changelog:

• Flashlight power decreased when the battery is low
• The peak headset volume increased to adjust the volume to 80% or more
• Improved alarm clock settings interface, dial settings interface, information settings interface and custom ring function
• Speaker noise issues fixed
  

--------------------------------------------------------------------------------

SP Flash Tool

Resources:

.

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

>>>>> ROM: UMIDIGI_G.V1.6_20170520.rar <<<<< - Extract the .rar file before use. The scatter file (MT6737M_Android_scatter.txt) is inside the extracted folder, together with the other components

SPFT: SP_Flash_Tool_v5.1712.rar

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI G if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMIDIGI G to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.