Diamond V6.0 20161123_155509 - SPFT release

bencebacsi Post time 2018-3-8 12:51:17 | Show all posts [Copy link]
7 6627
View: 6627|Reply: 7

Diamond V6.0 20161123_155509 - SPFT release

[Copy link]
Post time 2016-11-26 23:17:22 | Show all posts |Read mode
This is the SP Flash Tool release of the
V6.0 20161123_155509 firmware
for UMI Diamond

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMI Diamond receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.




Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

ROM: UMiDiamond_20161123-155509_songlixin_PC.rar - Extract the .rar file before use. The scatter file (MT6753_Android_scatter.txt) is inside the extracted folder, together with the other elements




Here's an optional solution to start the flashing process on your UMI Diamond if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop.
1. Connect your UMI Diamond to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.


diamond_2.jpg
         

0

threads

21

posts

179

credits

Senior Member

Rank: 2

credits
179
Post time 2017-3-3 18:39:37 | Show all posts
hello, broken screen (diamond) tell me where to buy, for the previously grateful.

0

threads

12

posts

93

credits

Senior Member

Rank: 2

credits
93
Post time 2017-4-14 20:56:59 | Show all posts
The upper curtain itself opens, what should I do?

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2017-10-6 01:01:02 | Show all posts
В этой прошивке есть троян Android.BackDoor.319. Где взять чистую прошивку
 Author| Post time 2017-10-12 06:55:02 | Show all posts
fedor replied at 2017-10-6 01:01
В этой прошивке есть троян Android.BackDoor.319. Где взять чисту ...

The system software itself doesn't contain any malware and virus scanners are not even able to scan the content of the system partition, unless if your phone is rooted.
The problem is caused by the BaBel Font app, what's originally a harmless app that's makes it possible to use custom fonts in the system but after it gets updated from the play store, it starts to install adware apps (not trojans). You can get rid of it by disabling it.
1. Go to Settings --> Apps
2. Tap on the 3-dot menu button in the top right corner and select 'Show system'
3. Scroll down to Font Manager, select and Force stop then Disable it.
Now you can search for the already installed adware apps and uninstall them. They won't be installed again.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2018-1-24 21:24:15 | Show all posts
Hello,

I would like flash my UMI diamond phone with the new ROM flash but the flash tool operation stops at 98%. It's like the boot loader is locked. It's possible to have a key to unlock the boot loader or something else?
I also add that i try to flash my phone because  it didn't start for few weeks.
Thanks
 Author| Post time 2018-1-26 08:09:25 | Show all posts
DAMIC replied at 2018-1-24 21:24
Hello,

I would like flash my UMI diamond phone with the new ROM flash but the flash tool operation  ...

Hi,

The flash tool doesn't care about the state of the bootloader if we are talkiong about a MediaTek platform. You might have a bad USB connection, driver issue or a in a worse case, a defective flash chip. Try to use at least a different USB cable and/or computer for flashing.
On the other hand, you can find the latest ROM here: http://community.umidigi.com/forum.php?mod=viewthread&tid=7599 Please try to use that.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2018-3-8 12:51:17 | Show all posts
Hi, i got an Umi Diamond and whatever ROM i flash on it, it shows ghost touch and the WiFi connection keeps turning on and off without stop. It's very annoying for me and sometimes i wanna throw my phone into the wall... Is there any solution for it? I got it since one year ago and it showed this for the first time by around 4 months of use, and then i just keep flashing different ROMs for it but this bug never stops coming back. PLEASE HELP ME, UMDIGI COMMUNITY!
You have to log in before you can reply Login | WELCOME TO UMI COMMUNITY

Points Rules

!fastreply! Top !return_list!