UMIDIGI One Pro V2.0_20180903 ROM - SPFT + OTA release

bencebacsi Post time 4 Day Before | Show all posts [Copy link]
12 878
View: 878|Reply: 12

UMIDIGI One Pro V2.0_20180903 ROM - SPFT + OTA release

[Copy link]
Post time 2018-9-8 06:37:16 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V2.0_20180903 system software
for UMIDIGI One Pro

Flash tool operation is recommended to experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI One Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.






Changelog:
  • Adaptive brightness control fixed
  • Minor bug fixes

The system will show UMIDIGI_One_Pro_V2.0_20180815 as Build number after this update but the real version is V2.0_20180903
FOTA version: UMIDIGI_One_Pro_V2.0_20180815_20180903-1601


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Extract the .rar file before use. The scatter file (MT6763_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI One Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI One Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal memory of your phone
  • Go to Settings --> System --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update: >>> UMIDIGI_One_Pro_V2.0_20180815_20180903-1601_update.zip <<<
It can update version 20180822 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
         

0

threads

44

posts

249

credits

Platinum Member

Rank: 3Rank: 3

credits
249
Post time 4 Day Before From the mobile phone | Show all posts
Hello will be updated to Android 9 in the future?

0

threads

3

posts

22

credits

New Member

Rank: 1

credits
22
Post time 2018-9-12 14:27:41 | Show all posts
good day!
I have a problem.
I have install two sim cards (beeline).
1. An incoming call on sim1 - ok.
2. In a few minutes. An incoming call on sim2 - ok.
3. In a few minutes. The incoming call on sim1 - isn't available.
4. After reboot all sim are available.

All outgoing calls - ok.

Please, help me.

0

threads

3

posts

26

credits

New Member

Rank: 1

credits
26
Post time 2018-9-13 23:01:59 From the mobile phone | Show all posts
TWRP for UmiOnePro: https://mega.nz/#!k9NhhKbS!L5JIWB7XrfRXvE5DKFl2PeJ8uqQKEuaseOH5BGSeZvA

0

threads

4

posts

18

credits

New Member

Rank: 1

credits
18
Post time 2018-9-15 19:19:55 | Show all posts
Телефон не включается, при подключении зарядного устройства включается красный индикатор, больше никаких признаков жизни не подает.

0

threads

1

posts

6

credits

New Member

Rank: 1

credits
6
Post time 6 Day Before | Show all posts
When will I get this version over the air? I'm still on V2.0_20180815.

I cannot setup another fingerprint, and I cannot get into the SmartLock item in the settings. It asks for a pin number, and when I enter the (correct) pin number it simply return to the setup screen.

When I exceed the number of fingerprint unlock attempts, I need to enter my pin number. As soon as I do that the phone locks up and eventually resets itself.

0

threads

44

posts

249

credits

Platinum Member

Rank: 3Rank: 3

credits
249
Post time 5 Day Before From the mobile phone | Show all posts
Good morning the terminal is fine, I would like to know if at the end of the year will be updated to Android 9, thanks.

0

threads

16

posts

56

credits

Senior Member

Rank: 2

credits
56
Post time 4 Day Before | Show all posts
Casagrandeeddi replied at 2018-9-19 22:19
Good morning the terminal is fine, I would like to know if at the end of the year will be updated to ...

Usually after a year or less they move on and forget about the phone, hopefully they wont do the same mistake with these phones like one or z2.

1

threads

6

posts

23

credits

New Member

Rank: 1

credits
23
Post time 4 Day Before | Show all posts
hello i have a serious problem with this rom, all the app don't start in background a fter reboot, then i'm note able to receve notification in real time from whatsapp, messenger, gmail, can you help me, i do a factory reset but problem stil exist

0

threads

16

posts

56

credits

Senior Member

Rank: 2

credits
56
Post time 4 Day Before | Show all posts
tarik3344 replied at 2018-9-20 14:33
hello i have a serious problem with this rom, all the app don't start in background a fter reboot, t ...

Is the Sync module active from the top quick menu?
12Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

!fastreply! Top !return_list!