UMIDIGI S2 Pro V1.0_20180201 ROM - QGDP + SPFT + OTA release

bencebacsi Post time 2018-2-6 18:01:08 | Show all posts [Copy link]
115 10482
View: 10482|Reply: 115

UMIDIGI S2 Pro V1.0_20180201 ROM - QGDP + SPFT + OTA release

[Copy link]
Post time 2018-2-5 20:35:54 | Show all posts |Read mode
This is the QGDP + SP Flash Tool + OTA release of the
V1.0_20180201 (UMI OS V2.0.027) system software
for UMIDIGI S2 Pro


Flash tool operation (either SP or QGDP) is recommended to experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI S2 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (you've bricked your phone or the system software is damaged), or if you want to get a clean installation of the official system software to make your phone able to install FOTA updates again.

WARNING!
Flashing this ROM on any other model may permanently brick your device, flashing the original ROM that fits your device might not be possible anymore!
Please make sure, double check that, you are working with a UMIDIGI S2 Pro smartphone before starting the flashing process with this ROM!




Changelog:
  • Optimized system performance
  • Minor bug fixes


--------------------------------------------------------------------------------
QGDP (official tool for flashing)
Resources:


Extract the .rar file before use.

QGDP flasher: QGDP_ASE_3.2.0_S2PRO.rar New version, please downlooad it! Choose 'TEST' in the drop-down list, then you can log in.

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

--------------------------------------------------------------------------------
SP Flash Tool (unofficial but recommended tool for flashing)
Resources:


ROM: >>>>> 20180201_g27v57c2k_kw_s82.rar <<<<< DB files included
Extract the .rar file before use. The scatter file (MT6757_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI S2 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI S2 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal memory of your phone
  • Go to Settings --> About phone --> System update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select Restart now. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update: >>>>> UMIDIGI_S2_PRO_V1.0_20180201_update.zip <<<<< It can update version 171227 (180117) only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card
  • Press and hold the volume-up and power buttons together until your phone restarts (the boot screen is displayed), then immeduately release the power button and keep only the vol-up button pressed until your phone boots into recovery. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can see a lying android figure with an exclamation mark in red triangle on its tummy.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
         

 Author| Post time 2018-3-22 11:15:08 | Show all posts
UutGrunn01 replied at 2018-3-20 19:41
When will we receive the OTA for the 20180201 ROM

It's already available.

Comments

Wanneer ik naar de system update ga krijg ik het antwoord dat ik de laatste versie heb. UMIDIGI_S2_PRO_V1.0_20171227. De nieuwste versie is toch 20180201?  Post time 2018-3-22 18:34

0

threads

12

posts

84

credits

Senior Member

Rank: 2

credits
84
Post time 2018-3-7 04:12:42 | Show all posts
flat4 replied at 2018-3-7 03:33
Just the notice of the update, tried 3 times, downloads, reboots, circle says updating do not turn ...

I finally succes. I try updating with charging, and be succes install update. You can try too.

0

threads

5

posts

24

credits

New Member

Rank: 1

credits
24
Post time 2018-2-9 14:26:04 | Show all posts
bencebacsi replied at 2018-2-9 10:43
Hi,
Which flasher app did you try? Did you check the preloader com port in your Windows device man ...

Hello, i was using the qgpd flasher. And whenever i plug my phone in, the preloader pops up for a second but  then it's gone. I've tried reinstalling it a couple of times but no success.



0

threads

8

posts

72

credits

Senior Member

Rank: 2

credits
72
Post time 2018-2-22 04:30:38 | Show all posts
420Legend replied at 2018-2-16 15:56
Update vi for manual OTA update: >>>>> coming soon...

Still nothing..!?!

0

threads

12

posts

541

credits

Diamond Member

Rank: 4

credits
541
Post time 2018-2-5 23:16:57 | Show all posts
dalej system widzi aktualizację jako Umidigis2 pro v1.020171227

0

threads

4

posts

62

credits

Senior Member

Rank: 2

credits
62
Post time 2018-2-6 03:32:36 | Show all posts
MTS in Russia for unknown reasons hangs.  Helps incl. off. "flight mode"
 Author| Post time 2018-2-6 05:27:00 | Show all posts
busius replied at 2018-2-5 23:16
dalej system widzi aktualizację jako Umidigis2 pro v1.020171227

Check the kernel date, that's correct.

3

threads

21

posts

105

credits

Senior Member

Rank: 2

credits
105
Post time 2018-2-6 05:58:49 | Show all posts
Hi, what type of bugs did you fix. Please, make an official update that allows you to change the launcher, thanks. That’s because if a user buy an android, it’s because we like customize it, ind if you don’t want to do it, you buy an iPhone... But if we need to flash the phone to use a launcher, have problems... it’s easier to buy an iPhone and install cydia... you know what I mean? Thanks.

1

threads

28

posts

172

credits

Senior Member

Rank: 2

credits
172
Post time 2018-2-6 07:26:20 | Show all posts
ciao @bencebacsi
trying to run the official tool on win10, it raise error on start
I can't find any log, how can I check the problem?

Thank you
 Author| Post time 2018-2-6 08:04:57 | Show all posts
Psk.It replied at 2018-2-6 07:26
ciao @bencebacsi
trying to run the official tool on win10, it raise error on start
I can't find any  ...

Hi,
Do you get an error message? Could you share a screenshot showing your error?

1

threads

28

posts

172

credits

Senior Member

Rank: 2

credits
172
Post time 2018-2-6 09:37:07 | Show all posts
bencebacsi replied at 2018-2-6 08:04
Hi,
Do you get an error message? Could you share a screenshot showing your error?

it says simply "QGDP" has stopped working, with the "terminate the application" command button

 Author| Post time 2018-2-6 11:13:32 | Show all posts
Psk.It replied at 2018-2-6 09:37
it says simply "QGDP" has stopped working, with the "terminate the application" command button

Checked it right now again and the app works properly on a 64-bit Windows 10 Pro PC. Which Windows version are you using? Are you logged in with admin rights?

0

threads

12

posts

541

credits

Diamond Member

Rank: 4

credits
541
Post time 2018-2-6 18:01:08 | Show all posts
bencebacsi replied at 2018-2-6 05:27
Check the kernel date, that's correct.

yes, the kernel date is correct
12345678910... 11Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

!fastreply! Top !return_list!