UMIDIGI C2 V1.6_20171019 ROM - QGDP + SPFT release

bencebacsi Post time 2017-11-10 13:36:51 | Show all posts [Copy link]
76 8862
View: 8862|Reply: 76

UMIDIGI C2 V1.6_20171019 ROM - QGDP + SPFT release

[Copy link]
Post time 2017-10-23 22:40:57 | Show all posts |Read mode
This is the QGDP + SP Flash Tool release of the
V1.6_20171019 (UMI OS 2.0) system software
for UMIDIGI C2
Flash tool operation (either SP or QGDP) is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI C2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

WARNING!
Flashing this ROM on any other model may permanently brick your device, flashing the original ROM that fits your device might not be possible anymore!
Please make sure, double check that, you are working with a UMIDIGI C2 smartphone before starting the flashing process with this ROM!




Changelog:
  • Fixed screen turn off while recording video


--------------------------------------------------------------------------------
QGDP (official tool for flashing)
Resources:


Extract the .rar file before use.

QGDP flasher: QGDP_Assembly_3.1.8.0630_portable.rar The password when running the tool: ase

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

--------------------------------------------------------------------------------
SP Flash Tool (unofficial tool for flashing)
Resources:


Extract the .rar file before use. The scatter file (MT6750_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI C2 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI C2 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.
         

Post time 2017-11-5 03:22:20 | Show all posts
walterpontual replied at 2017-11-4 09:49
My device introduced the "ghost touch" issue as soon as I called it the first time. Is there a solut ...

Hi
Please use SPFT and follow this instruction
http://community.umidigi.com/thread-11-1-1.html
Please uncheck user data if you want keep all pictures etc on your device but I strongly recommending flash whole ROM as in tutorial.
Please use full ROM for SPFT provided in this thread.

0

threads

12

posts

50

credits

Senior Member

Rank: 2

credits
50
Post time 2017-10-24 05:30:55 | Show all posts
I got this update today.

Why is my changelog different?

Here, the log says:
* Fixed screen turn off while recording video

The changelog on my phone says:
1. Front Camera Optimized
2. Update the Italian translation

I'm confused, what was wrong with the front camera?

Front=selfie camera
Back=main camera

I did a quick check and found out the main camera doesn't auto focus anymore?!
 Author| Post time 2017-10-24 06:43:29 | Show all posts
MichelB replied at 2017-10-24 05:30
I got this update today.

Why is my changelog different?

''1. Front camera optimized'' is just probably the result of mistranslated words. The second change is not important to any non-Italian users.
Try to clear the cache of the internal storage and the cached data of the camera app but if the camera drivers have been updated, you might need to perform a factory data reset.

0

threads

4

posts

24

credits

New Member

Rank: 1

credits
24
Post time 2017-11-2 06:58:26 | Show all posts
If you place a ringtone in the Ringtones folder, the ringtone will not be available and you must put it in the Music folder to set the ringtone

0

threads

4

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2017-11-2 22:40:15 | Show all posts
Bei dieser Version wurde mein Umidigi C2 bei einfachen Anwendungen und selbst beim telefonieren unnormal heiss, so daß ich die vorhergehende Version wieder aufspielen musste.

0

threads

3

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2017-11-4 09:49:57 | Show all posts
My device introduced the "ghost touch" issue as soon as I called it the first time. Is there a solution for this without returning the mobile phone for assistance? I am in Brazil and the only version of software released automatically was V1.5_20170921 that did not do anything, even after redefining the factory configuration and taking the movie from the screen

0

threads

3

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2017-11-5 06:18:03 | Show all posts
MarcinP replied at 2017-11-5 03:22
Hi
Please use SPFT and follow this instruction
http://community.umidigi.com/thread-11-1-1.html

Apparently the device is normal now after deactivating the application "Intelligent Aggregating Page" according to guidelines of the previous topic. If the problem comes up again I will reset the factory. Thanks for answering!

0

threads

2

posts

10

credits

New Member

Rank: 1

credits
10
Post time 2017-11-9 14:57:31 | Show all posts
Hello
Help to buy a Sim Card Slot for Umidigi C2.
 Author| Post time 2017-11-10 13:36:51 | Show all posts
left replied at 2017-11-9 14:57
Hello
Help to buy a Sim Card Slot for Umidigi C2.

Hi,
I'm afraid currently it's not availble as a spare part.
12345678Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

!fastreply! Top !return_list!